AF SLEEVE B
1Pages

{{requestButtons}}

Catalog excerpts

AF SLEEVE B - 1

TECHNICAL DATA SHEET AF SLEEVE B Fireproof sleeve for insulated metal pipes and electrical cables DESCRIPTION AF SLEEVE B is an intumescent sleeve certified under EN 1366-3 for up to EI 240 sealing of cable bundle and metal pipe penetrations insulated with combustible and non-combustible pipe sections, in walls and floors. The product guarantees the integrity and thermal insulation for pipe penetrations up to a maximum diameter of 200 mm with insulation of a maximum thickness of 60 mm due to its high intumescence. The strip's thin profile (only 4 mm high) enables its application around the pipe directly inside the rigid structure without removing the insulating cupel. DIRECT APPLICATION Electrical cable bundles in corrugated pipes Bundled multilayer pipes Metal pipes with insulation FEATURES Dimensions: Free expansion: Activation temperature: Pressure generated: PACKAGING AND STORAGE 10 m rolls, 50x4 mm section Unlimited under normal storage conditions APPLICATION METHOD 1. Wrap AF SLEEVE B around the penetration to be protected (check the application data sheets for the winding numbers needed); 2. fix AF SLEEVE B with adhesive tape at the penetration; 3. so that it is inserted flush with the sealing consisting of a double AF PANEL glued and sealed with AF SEAL W. SPECIFICATION Supply and application of AF SLEEVE B intumescent sleeve, which has an expansive capacity of more than 20 times the initial volume, for up to EI 240 protection of insulated metal pipes in walls and floors. The system is certified for use in combination with semi-rigid AF PANEL rock wool panels. CERTIFICATIONS Class EI 240 (UNI EN 1366-3) Class EI 180 (UNI EN 1366-3) Class EI 120 (UNI EN 1366-3) Class EI 120 (UNI EN 1366-3) rigid floor rigid wall plasterboard wall self-supporting wall Class EI 120 (UNI EN 1366-3) Class EI 120 (UNI EN 1366-3) Class EI 120 (UNI EN 1366-3) sandwich wall Xlam wall membrane false-ceiling The information contained in this data sheet is based on our latest knowledge and experience. Under no circumstances can this information imply a guarantee, or responsibility for the misuse of our products, since the conditions of use are not under our control. The technical and performance features in this data sheet are periodically updated. The revision number of this file is indicated in the space below. Any changes can be found on our website www.afsystems.it VERSION.0222

Open the catalog to page 1

All AF Systems catalogs and technical brochures

  1. AF COLLAR C

    1 Pages

  2. AF COLLAR

    1 Pages

  3. AF BRICK

    1 Pages

  4. AF SLEEVE B3

    1 Pages

  5. AF BAGS

    1 Pages

  6. AF PLUG

    1 Pages