TECHNICAL DATA SHEET AF BAGS Fireproof pillow for cable tray penetrations DESCRIPTION AF BAGS are intumescent and ablative fireproof pillows certified under EN 1366-3 for up to EI 240 sealing of cable tray penetrations. Inside a non-combustible fibreglass casing, a high-density concentrate of intumescent components, inert thermal insulators and products with gradual release of water, minimises the depth of sealing necessary to contain the passage of heat: with an insulating thickness for cables up to 21 mm in diameter of only 120 mm, AF BAGS can be completely inserted even inside thin structures without providing a frame around the penetration perimeter. AF BAGS are easily repositioned and recommended to facilitate system maintenance or modification. DIRECT APPLICATION Cable tray FEATURES Water and moisture proof They are rot-proof and mould and bacteria resistant They are suitable to be installed in any environment Do not contain harmful materials or fibres DIMENSIONS Model PACKAGING AND STORAGE Cardboard boxes Unlimited under normal storage conditions APPLICATION METHOD 1. measure the cable tray dimensions (width) and choose the size and number of pillows needed to completely close the penetration. For the calculation, consider that the certified side (wall thickness) is 120 mm; 2. apply the bags inside the cable tray, and position them with the certified side (120/200 mm) as "wall thickness", until the cable tray is completely filled; 3. seal any remaining space in the intrados between the opening and the cable tray with AF SEAL W sealant. SPECIFICATION Supply and application of AF BAGS fireproof pillows, consisting of a 200 g/m2 non-combustible fibreglass casing and containing intumescent granular compounds, thermal insulating aggregates and products with gradual release of water, for protection up to EI 240 of cable tray penetrations in walls, floors and on a structure consisting of AF PANEL rock wool double panel. The product is certified for "small" - "medium" and "large" cable penetrations, to create a fireproof seal for cables with a diameter of up to 21 mm ("small") with a sealing depth of 120 mm even on non-conventional structures such as sandwich and self-supporting walls. CERTIFICATIONS Class EI 240 (UNI EN 1366-3) Class EI 180 (UNI EN 1366-3) Class EI 120 (UNI EN 1366-3) rigid floor rigid wall plasterboard wall Class EI 120 (UNI EN 1366-3) Class EI 120 (UNI EN 1366-3) Class EI 120 (UNI EN 1366-3) self-supporting wall sandwich wall Xlam wall The information contained in this data sheet is based on our latest knowledge and experience. Under no circumstances can this information imply a guarantee, or responsibility for the misuse of our products, since the conditions of use are not under our control. The technical and performance features in this data sheet are periodically updated. The revision number of this file is indicated in the space below. Any changes can be found on our website www.afsystems.it VERSION.0222