video corpo

Omnia Radiant
4Pages

{{requestButtons}}

Catalog excerpts

Omnia Radiant - 1

Omnia Radiant Fan coils with radiant panel for residential use Ceiling or floor mounted Aermec participate in the EUROVENT program: FCU the products are present on the site www.eurovent-certification.com LOW TEMPERATURE RADIATION VENTILATED HEATING COOLING - DEHUMIDIFICATION ENERGY SAVING LOW OPERATING COST Features Omnia Radiant and Omnia Radiant Plus Aermec innovative solutions In this particular worldwide market evolution, we are pleased to present to you OMNIA Radiant, which represents the innovation of the OMNIA AERMEC series, fan coils especially designed for residential comfort. OMNIA Radiant inherits all the advantages of the OMNIA UL series, and is characterized by the introduction of the frontal plate for radiant heating. OMNIA Radiant Plus is provided with the DC Brushless electric engine, equipped with the latest Inverter technology, granting the highest energy efficiency and able to regulate the air flow through the continuous fan speed modulation. This allows to achieve up to 60% in energy saving when compared to the traditional On-Off fan system, in both air conditioning and heating. OMNIA Radiant and Radiant Plus offer the following advantages when compared to the traditional systems: • the radiant plate combination – the finned coil allows the best winter comfort with the lower energy consumption because it provides heating with lower water temperature: only 45°C against the about 65°C needed for the traditional radiator. This not only increases the comfort for the user, but also significantly increases the overall efficiency in case of heat pumps usage; • the fan system allows to quickly reach the desired temperature, meeting the requirement of a fast start-up; • the unit can be combined other than the boiler, also to energy saving heat pumps: air to water, water to water and geothermic type; • the electrostatic charge filter standard supplied, provides pure and clean air; • during summer Omnia Radiant and Radiant Plus provide air conditioning and dehumidification in a fast and efficient way in every room. The four different working modes of Omnia Radiant annual functioning Radiant: Heating through radiation, comfortable and noiseless, is granted by the radiant plate placed on the front of the fan coil cover; if necessary, the triple-fins delivery head can be closed to increases the heating of the plate, thus maximizing the radiant effect. Radiant + Natural Convection With the triple-fins open, heating through natural convection, obtained thanks to the bigger coil exchange surface, is added to the radiant heating. As for the radiant-only mode (see above), the fan groups are in off mode. This results in acoustic comfort and energy saving. Radiant + Forced Convection The electronic regulation, precise and reliable, continuously compares the effective indoor temperature with the desired temperature: whenever the difference between the two should prove to be too high (e.g. during the heating system startup) the software will lead the fan system start-up. Start-up is fast and efficient and grants significant energy savings especially in rooms that are occasionally used. Radiant + Natural Convection Omnia Radiant during summer provides air conditioning and dehumidification: Radiant + Forced Convection Forced Convection During summer, Omnia Radiant and Radiant Plus provide air conditioning and dehumidification for each room of the house in a fast and efficient way. Efficiency and quietness benefit from the quality that has always characterized the Omnia series. Forced Convection

Open the catalog to page 1
Omnia Radiant - 2

Features of the Omnia Radiant series • OMNIA radiant (UL_R) standard features: - Radiant pane - Centrifugal fans - Three-speed motor - Condensate storage container, hydraulic - Switching valve - Water probe - Electro-statically preloaded filter - VMF-EOR thermostat - Compatible with VMF system • OMNIA radiant plus (UL_RI) standard fea- - Radiant pane - Centrifugal fans - Electric DC Brushless motor with Inverter - Condensate storage container, hydraulic hoses - Water probe - Switching valve - Electro-statically preloaded filter - Compatible with VMF system Omnia Radiant are easy to clean....

Open the catalog to page 2
Omnia Radiant - 3

Technical Data Static heating power (70°C)_(3) W_650_750 Static heating power (50°C)_(4) W_390_450 Static heating power (35°C)_(5) W_200_230 Total cooling capacity _W (med.)_1 780_231 0 Sensible cooling capacity _W (med.)_1 370_1 790 Static heating power (70°C)_(3) W_650_750_ Static heating power (50°C)_(4) W_390_450_ Static heating power (35°C)_(5) W_200_230_ Total cooling capacity _W (med.)_1 780_231 0_ Sensible cooling capacity _W (med.)_1 370_1 790_ Cooling. I^evel Qj: souncj pressure (A-weighted) measured in the Room temperature 27°C b.s./19°C b.u.; Cold water (in/out) 7°C/12°C r00m...

Open the catalog to page 3
Omnia Radiant - 4

Heating capacity with fan off UL26R - UL26RI 700 Inlet water temperature [°C] Inlet water temperature [°C] Mod OMNIA ULR - ULRI Height Width Depth Height with ZU (Accessories) Weight (1) (1) Standard conguration of unit with accessories Floor installation Aermec reserves the right to make all modification deemed necessary for improving the product at any time with any modification of technical data. Aermec S.p.A. Via Roma, 996 - 37040 Bevilacqua (VR) - Italia Tel. 0442633111 - Telefax 044293730 www.aermec.com Wall installation

Open the catalog to page 4

All AERMEC catalogs and technical brochures

  1. HWF

    4 Pages

  2. WFGI

    9 Pages

  3. WFGN

    7 Pages

  4. WFI

    9 Pages

  5. WFN

    8 Pages

  6. WRL 026 -161

    5 Pages

  7. BHP

    6 Pages

  8. DUALJET

    10 Pages

  9. ANK

    8 Pages

  10. ANLI

    8 Pages

  11. MGW

    2 Pages

  12. NSI

    4 Pages

  13. TA

    4 Pages

  14. TS

    2 Pages

  15. MHM

    4 Pages

  16. MHW

    2 Pages

  17. All product

    404 Pages

Archived catalogs