AIRQURE P1 POSITIVEINPUT VENTILATION APPLICATION Loft mounted whole-house Positive Input Ventilation unit designed to introduce fresh, clean and filtered air into the dwelling so to dilute, displace and replace the internal stale, contaminated, humid air. Suitable for floor or ceiling installation, in any position. SPECIFICATION Outer fan casing manufactured from powder coated galvanised sheet steel providing long lasting and robust construction. The unit is finished in white RAL 9010. Top cover made from strong durable ABS technopolymer. EC external rotor motor, provided with integral thermal protection, mounted on sealed for life ball bearings, and antivibration supports. Forward curved centrifugal impeller dynamically balanced and directly driven by the motor to provide a smooth airflow through the unit. External anti-dust washable pre-filter, easily removable without tools. Internal ISO Coarse 60% (G4) filter as standard. Design ceiling diffuser made of high quality ABS technopolymer. 2,5m flexible duct to connect ventilation unit and diffuser. Ease of installation: fixing eyelets are part of the fan body. Compact profile to fit in narrow loft spaces. Top cover easily removable for inspection and maintenance. Acoustic self-extinguishing foam lining for sound attenuation. Double filtration level to ensure that the incoming air is cleaned, removing dust, pollen and external air pollutants. Washable pre-filter to avoid longer contaminated particles being pulled into the main filter and restricting filtration which reduce the fliter lifetime. Integral magnet system to fix and easily remove (without tools) the washable prefilter. Discreet ceiling diffuser with adjustable blanking plates to direct the airflow to suit the needs of tenants. EC motor for energy saving and extremely quite operation. Effective to improve indoor air quality, to cure condensation and mould problems and to reduce Radon gas concentration. IAQ filter (accessory) to filter down to PM2.5 including diesel particulates and to filtrate odours, fumes and vapours. Tested to the latest standards: units are tested in the TUV Rheinland recognised laboratory at Aerauliqa, meaning accurate, up to date information on electrical safety, performance and noise level that can be relied upon. Designed and manufactured in accordance with EN60335-2-80 (Low Voltage Directive) and the EMC Directive (Electromagnetic Compatibility). AIRQURE P1-N • Multi-fuctional control: 2 speed operation (minimum and maximum speed both adjustable). • High speed override via remote switch or ambient sensor (e.g. SEN-HY accessory). AIRQURE P1-H • Integral heating element (500W) which tempers the incoming air when needed. • Multi-fuctional control: 2 speed operation (minimum and maximum speed both adjustable). • Automatic “heat recovery” mode speed increase when the loft temperature reaches the preset threshold. • Automatic standby mode to prevent undesired warm air entering the dwelling (e.g. during summer period). • High speed override via remote switch or ambient sensor (e.g. SEN-HY accessory). • Remote selection of the speed and heating element via dedicated CTRL-P1 controller (accessory). • Controllability via ModBus for BMS. • IoT connectivity (Alexa and Google Assistant) - coming soon. ACCESSORIES • IAQ filter. • Suspension kit. • Remote humidistat (SEN-HY) • CTRL-P1 controller. • Thermal insulated duct.

Application: renovation. Does not require any ducting system. How it works: a continuous running centralised single flow supply ventilation unit (AIRQURE P1) gently introduces fresh, clean, filtered air into the dwelling through a ceiling diffuser, to push out and replace the internal stale, contaminated, humid air. The loft mounting provides discrete installation and very quiet operation. Energy saving: the EC brushless motor significantly reduces the electricity consumption. Indoor Air Quality: a correctly specified mechanical ventilation system can ensure the quality of the indoor air is constantly...

- 230V ~ 50/60Hz. - air performance measured according to ISO 5801 a 230V 50 Hz, air density 1,2Kg/m3. - data measured in the TUV Rheinland recognised laboratory in Aerauliqa. (1) sound pressure level @ 3m in tree field, breakout, tor comparative purposes only. VL RESIDENTIAL VENTILATION CATALOGUE

RESIDENTIAL VENTILATION CATALOGUE