Product Sheet TECHNICAL DIVISION I-TRON 1 MAIN CHARACTERISTICS Applications Street lighting. STU-S: Asymmetrical optic for street, urban and cycle-path lighting (narrow emission). STU-M: Asymmetrical optic for street, urban and cycle-path lighting (medium emission). STU-W: Asymmetrical optic for wide urban and suburban road lighting. S03: Asymmetrical optic for wide urban and suburban road lighting. STA: Asymmetrical optic for long interdistance and wide roads. Colour temperature: 4000K (3000K optional) | CRI ≥ 70 LOR= 100%, DLOR= 100%, ULOR= 0% Photobiological safety class: EXEMPT GROUP LED source efficiency: 174 lm/W @ 400mA, Tj=85°C, 4000K Insulation class Protection degree LED Modules Tilt Angle Dimensions Weight Exposed surface Gear tray Removable. Gear tray integrated on luminaire body, separated from optic unit. Removable plate optional. Operating temp. Storage temperature Main reference standards STU-S Optic STU-M Optic STU-W Optic ELECTRICAL CHARACTERISTICS Rated voltage Power factor Mains connection Surge protection SPD (optional) 220÷240V 50/60Hz >0,95 (at full load - F, DA, DAC) For cables max section 4mm2 Up to 10kV | With SPD (optional) 10kV / 10kV CM/DM 10kV-10kA, type II, with LED signal and thermo fuse to disconnect load at the end of life. Control system (options) F: Fixed power not dimmable. DA: Automatic dimming (virtual midnight) with default profile. DAC: Custom DA profile. FLC: Constant light flux. WL: Wireless single point communication system. DALI: Digital dimming interface DALI. NEMA: Socket 7 pin (ANSI C136.41). ZHAGA: Socket 4 pin (ZHAGA Book 18). Optical unit lifetime (Tq=25°C, 500mA) MATERIALS Fixing Lower frame Upper canopy Closure Die-cast aluminum UNI EN1706 powder painted. Stainless steel captive screws. 99.85% aluminum with a surface finish in 99.95% with vacuum-sealed deposition. (Aluminum grade class A+ DIN EN 16268) Screen Cable gland Gasket Colour Flat tempered glass, 5mm thickness high transparency. Plastic cable gland M20x1.5 - IP68 Polyurethane RAL 7016 satinized matt - Cod. 3O AEC Illuminazione S.r.l. www.aecilluminazione.com - [email protected] 1/1 All the published photometrical data has been obtained

TECHNICAL DIVISION STU-M STU-S STU-W STU-M STU-S STU-W RATED LUMINAIRE FLUX* (Tq=25°C, 4000K, lm) RATED LUMINAIRE POWER* (Tq=25°C, Vin=230Vac, F/DA/DAC, W) AEC Illuminazione S.r.l. www.aecilluminazione.it - [email protected] 1

TECHNICAL DIVISION RATED LUMINAIRE FLUX* (Tq=25°C, 4000K, lm) RATED LUMINAIRE POWER* (Tq=25°C, Vin=230Vac, F/DA/DAC, W) *RATED LUMINAIRE FLUX / RATED LUMINAIRE POWER: Rated data obtained in laboratory. *RATED LED FLUX / RATED LED POWER: Rated data extrapolated from LED manufacturer datasheet. Values indicated in this technical sheet are to be considered rated values. Flux tolerance: ±7%. Power tolerance: ±5%. Power tolerance with ZHAGA version or power supply D4i/SR: ±10%. **Operating temperature: -40°C / +40°C The characteristics of the product listed above are subjected to change without notice....

TECHNICAL DIVISION STU-M STU-S STU-W STU-M STU-S STU-W RATED LUMINAIRE FLUX* (Tq=25°C, 3000K, lm) RATED LUMINAIRE POWER* (Tq=25°C, Vin=230Vac, F/DA/DAC, W) AEC Illuminazione S.r.l. www.aecilluminazione.it - [email protected] 1

TECHNICAL DIVISION RATED LUMINAIRE FLUX* (Tq=25°C, 3000K, lm) RATED LUMINAIRE POWER* (Tq=25°C, Vin=230Vac, F/DA/DAC, W) *RATED LUMINAIRE FLUX / RATED LUMINAIRE POWER: Rated data obtained in laboratory. *RATED LED FLUX / RATED LED POWER: Rated data extrapolated from LED manufacturer datasheet. Values indicated in this technical sheet are to be considered rated values. Flux tolerance: ±7%. Power tolerance: ±5%. Power tolerance with ZHAGA version or power supply D4i/SR: ±10%. **Operating temperature: -40°C / +40°C The characteristics of the product listed above are subjected to change without notice....