Airlite Anti-Mould
1Pages

Airlite Anti-Mould Technical Sheet Anti-mould solution based on isothiazoline active substance and ammonium salts Anti-mould, anti-algae and anti-moss Apply with a brush Anti-Mould is a purifying solution based on active isotyazolinic ingredients and ammonium salts capable of rapidly and definitively eliminating the presence of fungi, molds, algae and moss from the walls and from all surfaces possibly contaminated by microorganisms or higher plants. Anti-Mould can be applied on support such as: - Concrete - Grout - Plaster - Drywall - Internal and external walls - Flooring - Tile joints - Environments with high moisture content contaminated by biogenic agents 1 Use the product as it is or dilute it with water up to max 50% apply the product with brush on the contaminated surface 2 Leave to react (for 24 or 48 hours) until the moulds change color; they generally tend to discolor and form a spider's web. 3 Brush the entire surface treated with a plastic brush and dust with a dry cloth. 4 Clean the environment thoroughly to avoid contamination of the removed spores. Anti-Mould must be kept in the original containers, tightly closed, at a temperature between + 5 ° C and + 40 ° C. In these conditions the product is stable for at least 12 months. Anti-Mould is available in packs of 1lt. Terms decline warranties AM Technology Ltd applied strict quality standards both during the production of our products and the description of the products and their use. The high quality of the product is guaranteed, at our discretion, we are willing to replace or reimburse the price of any faulty product. Satisfying results do not depend only on the product but on many other facts that are out of our control. Therefore, except the replacement or the reimbursement in case of a faulty product, AM Technology Ltd DOES NOT GIVE ANY OTHER GUARANTEES, explicit or implicit, including guarantee of ELIGIBILITY FOR A PURPUSE OR MARKETABILITY, regarding the actual PRODUCTS, AM Technology does not take any other responsibilities. Possible discontent about the product must be communicated in writing in one (1) year from the date of the delivery. No claims will be considered out of the specified time interval or claims that are not in writing. The client must determine the suitability of the product for the purpose of its use and accept all the possible risks and responsibilities. Any approved change on the printed directions of use of our product must bear the signature of the technical Director of AM Technology Ltd. All the recommendations and information above based on the actual knowledge and experience of AM Technology Ltd. Nevertheless, AM Technology Ltd does not take any responsibility for the communication of such information and recommendation, that regard the intellectual right of ownership of third parties, particularly patent protection. In particular, AM Technology Ltd does not acknowledge any conditions or guarantees, EXPLICIT OR IMPLICIT, INCLUDING THE GUARANTEE OF SUITABILITY FOR A PURPOSE OR MARKETABILITY. AM Technology Ltd WILL NOT BE RESPONSIBLE FOR CONSEQUENT, INDIRECT OR ACCIDENTAL DAMAGES (including the loss of profit) of any kind. AM Technology Ltd reserves the right to make changes according to the technological progress or further developments. The client is responsible and obligated to case and verify with attention any incoming possible merchandise. The characteristics of the product or products described above must be verified by test and must be applied by a qualified person. The client has the exclusive responsibility to realize and control such tests. Commercial names used by other companies are neither recommendations, nor approval of any product and does not imply that other similar products cannot be used. © 2018 AM Technology Ltd. 1 Mark Square, EC2A 4EG London All the technical information included above is indicative, based on our experiences. The dates and the modalities present on the technical sheet can be modified any time, in case of improvements in the technology of the production. The application of the product being out of our control is the exclusive responsibility of the client. The technical assistance of AM Technology Ltd is available to provide supplementary information for the users. N.B. The image is for illustrative purposes only and shall not be legally binding. AM Technology Ltd. 1 Mark Square, EC2A 4EG London www.airlite.com