ADQUIO SENSORS MODBUS
11Pages

DATA SHEET ADQUIO SENSORS MODBUS Temperature and humidity probe, Modbus RTU. 1 Information for orders Reference Life cycle * Adquio Sensors Modbus, Probe with 2 sensors, temperature and humidity, connectable by Modbus RTU. * For the planning and commissioning of new installations, use modules in Active state only Adquio Sensors Modbus V 1.0 en_uk

3 Technical data Parameter Process voltage Connections Terminal block 3.55 Pitch 4 contacts Connection method Nominal value Maximum supported Protection against voltage inversion Rated protection fuse up to Consumption From a 24V power supply Adquio Sensors Modbus V 1.0 en_uk

CAUTION! Exceeding the maximum power supply voltage for the process or supply voltages could cause unrecoverable damage to the system. The system could be destroyed. WATCH OUT!! Inadequate connection cables cause overtemperature in the terminals. Adquio Sensors Modbus, can be destroyed if the wrong cable type, wire size, or wire temperature rating is used. Temperature Sensor type Resolution Accuracy tolerance Adquio Sensors Modbus V 1.0 en_uk

Operating range -40 to 125 ºC (Normal operating range: 0-80% RH , beyond this limit, the sensor can read a reversible drift with slow kinetics (+3%RH after 60h with humidity >80%RH).) Response time Drift to long term Humidity Sensor type Resolution 12 Bits, 0.04 % RH (Relative Humidity) Accuracy tolerance Response time 8s (Time to reach 63% of a step function, valid at 25°C and 1m/s airflow.) Operating range 0 to 100%RH (Normal operating range: 0-80 %RH, beyond this limit, the sensor can read a reversible offset with slow kinetics (+3%RH after 60 hours with humidity >80%RH). Long Term Drift...

5 System data 5.1 Environmental conditions Parameter Temperature Operation 5.2 Mechanical data Parameter Protection level Casing material Mounting alternatives Wall with double-sided tape Mounting with screws Only for flat surfaces, adhesives included For all types of surfaces, screws included Adquio Sensors Modbus V 1.0 en_uk

5.3 Communication protocol Parameter Modbus Speed Adquio Sensors Modbus V 1.0 en_uk

5.4 Modbus register configuration table Modbus positions Function Holding Register Holding Register Holding Register Adjust % humidity Holding Register Holding Register Direcc. Modbus configured Holding Register Holding Register Holding Register Holding Register Holding Register Holding Register Modbus address Holding Register * Probe registers must be divided by 100 to obtain the real value Adquio Sensors Modbus V 1.0 en_uk

5.5 Modbus address configuration table with microswitches Switch 1 Modbus address Adquio Sensors Modbus V 1.0 en_uk

Adquio Sensors Modbus V 1.0 en_uk

Adquio Sensors Modbus V 1.0 en_uk

Neuronal Innovation Control S.L. Rúa Ánade Real 11 15172 Oleiros, La Coruña Spain Telephone: +34 881 24 62 55 E-mail: support@adquio.com https://adquio.com © 2020-2021 Neuronal Innovation Control S.L. We reserve all rights to this document and the information contained therein. Reproduction, use or disclosure to third parties without express authorization is strictly prohibited. Adquio Sensors Modbus V 1.0 en_uk