1. Catalogs
  2. Adquio
  3. ADQUIO LORA SENSORS

ADQUIO LORA SENSORS

ADQUIO LORA SENSORS

ADQUIO LORA SENSORS

Product catalog summary
Ordering Information: The Adquio LoRa Sensors, specifically the ADQ-STH-LORA model, is a probe equipped with temperature and humidity sensors. It connects wirelessly via LoRa, offering low consumption and long-range capabilities. Only modules in the 'Active' state should be used for new installations.
Technical Data: The sensor operates on one or two 18650 batteries, with a voltage range of 3V to 4.2V. Maximum consumption during radio transmission is 10 mA. Exceeding voltage limits or using incorrect cables can cause damage.
Probes: The temperature sensor (SHT21) has a resolution of 14 bits and an accuracy tolerance of ±0.3°C typically. It operates between -40 to 125°C. The humidity sensor (SHT21) has a resolution of 12 bits and operates from 0 to 100% RH, with typical accuracy of ±2% RH.
System Data: The communication system uses LoRa technology with frequencies of 433/866/915 MHz, depending on the region. The SX1276 chip enhances range and reliability compared to FSK or OOK modulation. It supports various modulation types for compatibility with existing systems.
Ambient Conditions: The operational temperature range is -10°C to +60°C, with storage and transport conditions from -40°C to +70°C. The device can handle up to 95% non-condensing humidity and operates at air pressures >800 hPa.
Mechanical Data: The sensor is designed for wall mounting with an IP20 protection level. The casing is made of ABS white material, and it can be mounted using double-sided tape or screws.
Certifications: The device complies with various safety, health, and EMC standards, including EN ISO 13849-1:2015 and EN 61000-6-4:2007.
See more

Catalog excerpts

ADQUIO LORA SENSORS-1

DATA SHEET ADQUIO LORA SENSORS Temperature and humidity probe, LoRa. 1 Ordering information Reference Life cycle * Adquio LoRa Sensors, Probe with 2 sensors, temperature and humidity, wirelessly connectable through LoRa with low consumption and long range. * For the planning and commissioning of new installations, use modules in Active state only Adquio LoRa Sensors V 1.0 en_uk

 Open the catalog to page 1
ADQUIO LORA SENSORS-2

3 Technical data Parameter Supply Batteries Connection method Minimum and maximum value Consumption From batteries 10 mA maximum when radio transmission CAUTION! Exceeding the maximum power supply voltage for supply or process voltages could cause irrecoverable damage to the system. The system could be destroyed. CAUTION! Inadequate connection cables cause over temperature at the terminals. Adquio LoRa Sensors can be destroyed if the wrong wire type, wire size, or wire temperature rating is used. Adquio LoRa Sensors V 1.0 en_uk

 Open the catalog to page 2
ADQUIO LORA SENSORS-3

Temperature Sensor type Accuracy tolerance Operating range -40 to 125 ºC (Normal operating range: 0-80% RH , beyond this limit, the sensor can read a reversible drift with slow kinetics (+3%RH after 60h with humidity >80%RH).) Response time Drift to long term Humidity Sensor type Resolution SHT21 12 Bits, 0.04 % RH (Relative Humidity) Adquio LoRa Sensors V 1.0 en_

 Open the catalog to page 3
ADQUIO LORA SENSORS-4

Accuracy tolerance Response time 8s (Time to reach 63% of a step function, valid at 25°C and 1m/s airflow.) Operating range 0 to 100%RH (Normal operating range: 0-80 %RH, beyond this limit, the sensor can read a reversible offset with slow kinetics (+3%RH after 60 hours with humidity >80%RH). Long Term Drift Adquio LoRa Sensors V 1.0 en_uk

 Open the catalog to page 4
ADQUIO LORA SENSORS-5

5 System data 5.1 Communication Parameter Radio system LoRa 433/866/915 Mhz depending on the region Communication based on chip The SX1276 incorporates the spread spectrum modem LoRa which is capable of achieving significantly greater range duration than existing systems based on FSK or OOK modulation. At maximum LoRa data rates, sensitivity is 8dB better than FSK, but using a low cost BOM with a 20ppm XTAL LoRa can improve receiver sensitivity by more than 20dB compared to FSK. LoRa also provides significant advances in selectivity and blocking performance, as well as improving communication...

 Open the catalog to page 5
ADQUIO LORA SENSORS-6

More information and complete datasheet 5.2 Ambient conditions Parameter Temperature Operation 5.3 Mechanical data Parameter Protection level Casing material Mounting alternatives Wall with double-sided tape Mounting with screws Only for flat surfaces, adhesives included For all types of surfaces, screws included Adquio LoRa Sensors V 1.0 en_uk

 Open the catalog to page 6
ADQUIO LORA SENSORS-7

Neuronal Innovation Control SL Rúa Ánade Real 11 15172 Oleiros, La Coruña Spain Telephone: +34 881 24 62 55 E-mail: support@adquio. com https://adquio.com/?lang=en © 2015 - 2022 Neuronal Innovation Control SL We reserve all rights to this document and the information contained in it. Reproduction, use or disclosure to third parties without express authorization is strictly prohibited. Adquio LoRa Sensors V 1.0 en_uk

 Open the catalog to page 7
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.