FINISHING PLASTER Super plastic mortar for plasterworks and repairs Use: Finishing mortar, CS II according to SR EN 998 - 1 / 2011. Finishing plaster for finishing plasterworks indoors and outdoors, before applying plasters or paintings. Depending on the absorption of the base, it is properly primed or moistened. Product does not apply on wood, plastic, metal, plasterboards. Characteristics:  Smooth surface  High adherence  Easy processing Technical data: Item No.: Material foundation: Compressive strength 28 days: Granularity: Bucket time: Air/substrate temperature when placing: Consumption: Packaging: Delivery: Storage / Validity: TINCI Cement, mineral aggregates, polymers, plasticizers CS II according to EN 998 – 1 / 2011 0 – 1 mm Approx. 3 hours Min. +5°C max. +30°C Approx. 3- 4 kg / m2 Paper bag resistant to humidity 25 kg 12 months from date of fabrication on the packaging, according to Directive 1907/2006/EC and GR 932/2004, at 20°C and 65% relative humidity. Store in dry spaces on wooden pallets. Technical data and those related to consumption are determined in standard conditions. There may be differences depending on conditions of applications.

Base: Product is applied on plasterwork surface matured for at least 28 days. Surface must be clean, resistant, dry, without cracks or fissures, free of grease, dusts, loose debris, salts or any other materials than can form a separator layer. Fragile portions and mortar residues must be cleaned. Processing: Surface to be finished is moistened with water. Material is applied on the mate wet base, without excess water. For 25 kg mix homogenously approx. 5 – 5,5 liters of clean water, preferably with an electric mixer. Leave to rest for approx. 5 to 10 minutes and then give a short, vigorous mix...