MTI 25 Mortar for plastering and repairs, applicable by hand or with a plastering machine Use: Mortar for support or smoothened plastering, CS I according SR EN 998 - 1 / 2011 for indoors application on mineral bases. Mortar for manual or mechanical application, including in spaces with high humidity, such as bathrooms or kitchens. Depending on the absorption of the base, it is properly primed or moistened. Product is applied only on mineral bases. Product does not apply on wood, plastic, metal, plasterboards. Characteristics:  Very good adherence  Application up to 2,5 cm in a single layer  Super finished surface  Easy processing Technical data: Item No.: Material foundation: Class or mortar: Granularity: Bucket time: Reaction to fire: Absorption by capillarity: Air/substrate temperature when placing: Consumption: Packaging: Delivery: Storage / Validity: MTI 25 Cement, lime, mineral aggregates, polymers, plasticizers CS I according to SR EN 998 – 1 / 2011 0 – 2 mm Approx. 3 hours Class A1 W0 Min. +5°C max. +35°C Approx. 10 - 13 kg / m2 / cm Paper bag resistant to humidity, silo 30 kg, bulk 12 months from date of fabrication on the packaging, according to Directive 1907/2006/EC and GR 932/2004, at 20°C and 65% relative humidity. Store in dry spaces on wooden pallets. Technical data and those related to consumption are determined in standard conditions. There may be differences depending on conditions of applications.

Base: Product is applied on concrete, brick or ACC surfaces. It is necessary to prime, moisten or apply a product to achieve and adherence bridge, depending on the absorption of the base. Surface must be resistant, clean, dry, without cracks or fissures, free of grease, dusts, loose debris, salts or other material than can form a separator layer. Fragile portions and mortar residues must be removed. Joints between the masonry blocks are closed in advance with mortar. When using on ceilings or if applied in a layer under 10 mm, use ADEPLAST BETONKONTAKT for an adherence bridge. When applying on...

Important:  Consideration must be given to additional measures for the protection of surfaces against fast dehydration, bad weather or frost;  Avoid direct exposure of surfaces to sunlight during application;  Comply with the information in the technical security sheet;  This technical sheet replaces all previous versions. Information in this technical sheet represent our experience with this product up to this day. This technical sheet does not clear the user of the product from making his own decision and evaluation including by samples, regarding the appropriateness of using the product....