MARMOREX GREY Adhesive for marble, granite and granite floor tile Use: Adhesive mortar, C1 TE according to SR EN 12004+A1 / 2012. Adhesive for floor tiles, marble plating and other types of natural stone without risk of discoloration, for indoors and outdoors, in moist or dry areas, exposed to frost/thaw, and temperatures between -25°C and +80°C, in a thin layer, on mineral bases with or without absorption, cement plaster and cement lime, ACC, concrete, cement screeds and other similar. Depending on the absorption of the base, it is primed or properly moistened. Product does not apply on wood, plastic, metal, etc. Characteristics:  High resistance  High adherence  Easy processing  High flexibility Technical data: Item No.: Material foundation: Adhesive Class: Slippage: Initial adherence by tension: Adherence by tension, after water immersion: Adherence by tension after aging under heat: Adherence by tension after frost-thaw cycles: Bucket time: Open time: Air/substrate temperature when placing: Consumption: Packaging: Delivery: Storage / Validity: MARMOREX GRI Cement, mineral aggregates, polymers, plasticizer C1TE according to SR EN 12004+A1 / 2012 Max. 0,5 mm Min. 0,5 N/mm2 Min. 0,5 N/mm2 Min. 0,5 N/mm2 Min. 0,5 N/mm2 Approx. 2 hours 30 minutes Min. +5°C max. +30°C Approx. 3 – 4 kg/m2 Paper bag resistant to humidity 25 kg 12 months from date of fabrication on the packaging, according to Directive 1907/2006/EC and GR 932/2004, at 20°C and 65% relative humidity. Store in dry spaces on wooden pallets. Technical data and those related to consumption are determined in standard conditions. There may be differences depending on conditions of applications. DP-61; Ed.2

Base: Surface of the support layer must be resistant, clean, dry, without cracks or fissures, adherent and compact, free of grease, dusts, loose debris, salts or other materials than can form a separator layer. Fragile areas and mortar residues must be removed. Surface of the base must be washed and degreased with minimum 4 hours before applying the tiles. Inspect the surface by gently tapping with a hammer before plating, to determine the resistance of the base, respectively to see if it is resistant enough for plating. Mineral bases, concrete plasters or screeds must be minimum 28 days old,...