Product Information Millennium LPS Description Millennium LPS is a single component elastomeric polyurethane sealant that is isocyanate free. Millennium LPS cures rapidly under the effect of atmospheric air and moisture to form a flexible and resistant joint with very good adhesion on most materials. Basic Use Millennium LPS is a multi-use sealer that can be used for: • Adhering Millennium Lockin’ Pocket® to approved substrates • Sealing around penetrations prior to Lockin’ Pocket® installation • Repairing splits, cracks, holes and other membrane defects • Mid-level construction grade adhesive and sealant • Lightning protection attachment • Shingle repairs • All purpose sealer Single component No mixing, consistent material quality Isocyanate free Enhanced safety Remains flexible, absorbs stresses Approved Substrates • Granule surfaced Modified Bitumen • EPDM • TPO • Metal • Smooth surfaced asphalt Built-Up Roofs (BURs) • Gravel surfaced BUR • Asphalt coal tar pitch (BUR) • Concrete • Wood • Aluminum • Stone For a complete list of approved substrates, or for additional information, contact our Technical Department. Storage Shelf life is 12 months in unopened original packaging when stored at or below 80°F (27°C). Safety Prior to working with this or any product consult product label and Material Safety Data Sheet (MSDS) for necessary health and safety precautions. Limitations • Do not apply to a wet surface. • Requires atmospheric air and moisture to properly cure. Equipment • Professional 10 oz. (300ml) manual, pneumatic, or battery powered caulk gun Color • Black CAUTION: All statements and technical information in this document are based on tests or data that ADCO believes is reliable. However, ADCO does not warrant or guarantee the accuracy or completeness of this information. The user has sole knowledge and control of factors that can affect the performance of ADCO’s products in the user’s intended application. It is the user’s responsibility to conduct tests to determine the compatibility of ADCO’s product with the design, structure, and materials of the user’s end product and the suitability of ADCO’s product for the user’s method of application and intended use. The user assumes all risk and liability arising out of such use. P.O. Box 457, 4401 Page Avenue Michigan Center, MI 49254 Phone: (800) 248-4010 Fax: (517) 764-6697 www.adcocorp.com

Cut nozzle to desired size and puncture seal inside the nozzle. Refer to Millennium Lockin’ Pocket® Inter-Locking Flashing System product data sheet for complete application instructions. Gun/pump Millennium LPS around base of penetration to prevent Millennium Hurricane Force® Universal Sealer from flowing through the openings. Apply a liberal bead of LPS to the substrate where Lockin’ Pocket® will be placed. Apply a liberal bead of LPS to the locking joint of the Lockin’ Pocket®. Set Lockin’ Pocket® onto bead of LPS and apply equal pressure to assure positive contact with the substrate. Strike...