Quality bakery equipment for over 80 years BELSHAW ADAMATIC BAKERY GROUP DO NOT THROW AWAY - KEEP IN A SAFE PLACE SERVICE MANUAL Type K Pancake Dispenser Type K Donut Depositor Type K Hushpuppy Depositor Quality bakery equipment for over 80 years

OPERATION INSTRUCTIONS FOR TYPE K DEPOSITORS (Video of Type K Pancake Dispenser disassembly and reassembly is available at http://www.belshaw.com/support) How to Remove the Plunger The plunger of the depositor is locked in place with a peg key, held in place by the operating spring. This key is fixed to the release tab, which is located under the lower end of the spring. By lifting on the release tab, the peg key can be raised out of the slot in the hopper arch; then by rotating the release tab and the upper bearing ½ turn, the square key on the upper bearing can be cleared through the slot in...

CARE, MAINTENANCE, and CLEANING INSTRUCTIONS for PLUNGERS and HOPPERS The plungers and hoppers of your Type K are precision instruments built from alloy steels and aluminum. They should be handled with care to insure continued satisfactory performance. When cleaning aluminum, selection of the right type cleaner is your most important consideration. Any household dish washing detergent which is safe for aluminum does a good job of cleaning and does not attack aluminum. Strong Alkali cleaners, such as lye, soda ash, and tri-sodium phosphate, will discolor or even corrode aluminum even in weak solutions....

TYPE K PANCAKE DISPENSER PARTS BREAKDOWN Notched lock Spring Cup Lock Assembly Valve Assembly Cage Assembly Pushbutton Assembly Center Rod (must be fitted at factory) Operating Spring Lock Spring Hopper and Bail Assembly Skirt Valve Assembly ©BELSHAW ADAMATIC BAKERY GROUP • 814 44TH STREET NW SUITE 103 AUBURN, WA 98001 USA • WWW.BELSHAW.COM • WWW.BELSHAW-ADAMATIC.COM The Type K Pancake Dispenser does not accept a Donut or Hushpuppy Plunger TYPE K PANCAKE DISPENSER • TYPE K DONUT DEPOSITOR TYPE K HUSHPUPPY DEPOSITOR • OPERATOR’S MANUAL • MN-1536 111010

TYPE K DONUT DEPOSITOR Spring Cup Lock Assembly Center Rod (must be fitted at factory) Operating Spring Hopper and bail assembly (1-9/16”) Spider Valve assembly Floating Valve assembly (1-9/16”) ©BELSHAW ADAMATIC BAKERY GROUP • 814 44TH STREET NW SUITE 103 AUBURN, WA 98001 USA • WWW.BELSHAW.COM • WWW.BELSHAW-ADAMATIC.COM The depositor accepts EITHER a 1” plunger OR a 1-9/16” plunger. Different sizes are not interchangeable TYPE K PANCAKE DISPENSER • TYPE K DONUT DEPOSITOR TYPE K HUSHPUPPY DEPOSITOR • OPERATOR’S MANUAL • MN-1536 111010

TYPE K HUSHPUPPY DEPOSITOR PARTS BREAKDOWN Notched lock Spring Cup Lock Assembly Center Rod (must be fitted at factory) Operating Spring Hopper and Bail Assembly Spider Valve Assembly Floating Valve Assembly Also accepts: K-1013A Pancake Plunger Assembly (1-9/16”) K-1011A Plain Donut Plunger assembly (1-9/16”) K-1011S Star Donut Plunger assembly (1-9/16”) ©BELSHAW ADAMATIC BAKERY GROUP • 814 44TH STREET NW SUITE 103 AUBURN, WA 98001 USA • WWW.BELSHAW.COM • WWW.BELSHAW-ADAMATIC.COM TYPE K PANCAKE DISPENSER • TYPE K DONUT DEPOSITOR TYPE K HUSHPUPPY DEPOSITOR • OPERATOR’S MANUAL • MN-1536 111010

WARRANTY, TERMS AND CONDITIONS TABLES AND FORMULAS USED IN DONUT MAKING ABLES AND ORMULAS SED IN ONUT AKING D FORMULAS Correct Water ONUT MAKING USED IN D Temperature Calculating Correct Water Temperature Calculating The following is an example of how to calculate the correct water temperature to use. You must use your own The following is an example Water Temperature of how to calculate the correct water temperature to use. You must use your own room temperature, dry mix temperature, desired batter temperature, and, if you are making yeast-raised donuts, room temperature, dry mix temperature,...

is postponed or delayed for any reason by the Buyer, the Buyer agrees to reimburse the Seller for all storage costs and any other expenses resulting from this. Damaged Shipment -- As a matter of customer service, the Seller will assist in filing damage or shortage claims, provided the equipment was shipped prepaid and add. If the shipment was sent “Freight Collect,” the Buyer has the full responsibility of filing the claim against the freight company. In all cases, the Buyer has the responsibility to inspect the shipment for completeness and to assure it is free of any visible damage. If the...

warranted where (non-liquid) Trans Fat Free shortening is used. The Seller has sole and final discretion in determining whether a warranty claim is due to defects in workmanship or material. No warranty shall apply in the event of modifications, abuse, improper use, abnormal operating conditions or failure to follow all specified maintenance and cleaning procedures. Should any equipment require repairs or replacement under this warranty, the Seller may use later-generation or equivalent parts with the same functions or features as the parts being repaired or replaced. Repair and replacement materials...