ARO-2G

ARO-2G

ARO-2G

Product catalog summary
Product Overview: The Adamatic ARO-2G is a gas-powered double rack oven designed for bakery operations. It features a stainless steel interior and exterior, a heavy-duty steam system, and a digital control panel with 99 programmable menus. The oven accommodates two single racks or one double rack up to 75 inches tall and includes a maintenance-free mechanical lift rack system.
Specifications: The oven is equipped with a heavy-duty dual lock door handle, automatic overpressure steam duct, and a reinforced floor that requires no anchoring. It includes a high-density insulation of 6.25 lbs/cu. ft. and comes with a one-year parts and labor warranty, and a three-year warranty on the heat exchanger (parts only).
Options: Available options include different lift styles, liquid propane compatibility, high altitude draft inducer, and aluminum or stainless steel races. An optional 480V motor circuit is also available.
Electrical Supply: The oven requires two electrical connections located on the left side. The control circuit operates at 120VAC-60-1 @7.4 Amps, and the standard motor circuit at 208-240VAC-60-3 @8.4 Amps. An optional motor circuit operates at 480VAC-60-3 @3.6 Amps.
Water Supply: The oven requires a hot or cold water supply with a pressure of 40-75 psi. The water supply should meet specific quality standards, including total dissolved solids, hardness, calcium, magnesium, pH range, chloride, and alkalinity.
Drain Requirements: The oven includes a 1” NPT connection for drainage, with both front and rear drainage options. The rear drain is recommended.
Gas Requirements: The oven requires a 3/4” NPT connection with a natural gas supply of 350,000 BTU/hr at 7”-14” static pressure. An optional liquid propane supply is also supported.
Combustion Venting Requirements: The oven includes an 8” diameter collar for combustion venting, with specific installation instructions for the barometric damper and draft inducer.
Steam, Overpressure, and Hood Venting Requirements: The oven includes specific venting requirements for steam, overpressure, and hood, with all flues needing to be terminated with a windproof cap.
Installation Requirements: The oven must be installed on a smooth, level, and heat-resistant floor. It requires a minimum ceiling height of 10 feet and must be installed and started up by authorized technicians to validate the warranty. All utility and venting connections must comply with relevant codes and regulations.
See more

Catalog excerpts

ARO-2G-1

The First Name In Bakery Adamatic ARO-2G Double Rack Oven, Gas Standard Features: • • • • • • • • • • • • • • Stainless steel interior/exterior Heavy duty self contained steam system Digital control panel with 99 menus High volume/low velocity airflow Fits two single racks or one double rack up to 75” tall with “C” style lift Maintenance free mechanical lift rack system Heavy duty dual lock door handle and hinges Automatic overpressure steam duct Shipped in three pieces for easy assembly Reinforced floor (requires no anchoring) Heavy duty heat exchanger High density insulation 6.25 lbs/cu. ft. One year parts/labor warranty Three year heat exchanger warranty (parts only) “A” or “B” style lifts Liquid Propane High altitude draft inducer Aluminum or stainless steel races 480V motor circuit Model shown: ARO-2G Rack Oven ADAMATIC • Division of Belshaw-Adamatic Bakery Group, 814 44th St NW, Suite 103, Auburn WA 98001 Phone: 732-544-8400 | 800-526-2807 Fax: 732-544-0735 • [email protected] • www.adamatic.com ©1/2008 Product specifications may be changed without notice. Always obtain current spec sheet at time of purchase. Bakery Group

 Open the catalog to page 1
ARO-2G-2

The First Name In Bakery ELECTRICAL SUPPLY • Two electrical connections (E) required. These are located in the control housing located on the left side of the oven. P • Power leads should be dropped from above the oven; actual connection is located 12” from the left side, 53” from rear and 73” from floor. • Control Circuit 120VAC-60-1 @7.4 Amps (minimum 15 Amp dedicated breaker) • Standard Motor Circuit 208-240VAC-60-3 @8.4 Amps (minimum breaker size 15 amps) • Optional Motor Circuit 480VAC-60-3 @3.6 Amps WATER SUPPLY • Hot or cold water 40-75 psi • Line to be dropped from ceiling (see (W) for...

 Open the catalog to page 2

All ADAMATIC catalogs and technical brochures

  1. Moulders

    8  Pages

  2. BL Bowl Lift

    2  Pages

  3. Bread Lines

    12  Pages

  4. Type F-YRD

    2  Pages

  5. Type F

    2  Pages

  6. PRF-2022

    2  Pages

  7. PRF-2021

    2  Pages

  8. OVEN-2010

    2  Pages

  9. DX Oven

    2  Pages

  10. OVEN 2020

    4  Pages

  11. Rack Loader

    2  Pages

  12. SD-300

    2  Pages

  13. MO-671

    2  Pages

  14. CR-360

    2  Pages

Archived catalogs

  1. AMDO-2W

    2  Pages

  2. USR01

    2  Pages

  3. AMRO-E series

    2  Pages

  4. AMRO-G Series

    2  Pages

  5. BX3-E - BX4-E

    6  Pages

  6. AP-1W

    2  Pages

  7. AADR-2

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.