EEH
1Pages

EEH EMERGENCY EGRESS HATCH Application • In Metro systems everywhere, the EEH Emergency Egress Door provides passengers and crew with an auxiliary exit to the street level in emergency situations Product Features • Channel frame construction with anchors welded around the frame for casting into concrete. • Diamond plate door panel is reinforced fora live load of 300 pounds/sgft. (pedestrian loading or light vehicular loading for off-street locations). EEH EMERGENCY EGRESS Floor Door Specifications: Material: Cover and frame shall be mill finish aluminum. All hardware shall be 316 stainless steel. Door: 1/4" Diamond plate door panel is reinforced for a live load of 300 pounds/sgft. (pedestrian loading or light vehicular loading for off-street locations) with flush steel lifting handles. Covers shall be eguipped with 316 stainless steel hold-open arms with red vinyl grip to hold cover in the 90 degrees open position. Frame: 3/8" aluminum channel that drains rainwaterthrough a 1-1/2" pipe coupling. Hinge: 316 stainless steel with tamper resistant fasteners. Springs: Stainless steel compression springs enclosed in telescoping tubes. Lowertube interlocks with spring support bracket welded to the doorframe. Latch: Two-point 316 stainless steel with interior push bar and exterior plug for fire department spanner. Hand Rail: Aluminum tubing welded to each cover. Signage: "Push Bar"and"Keep Clear"signs to be included. SIZES OPTIONS: EEH Emergency Egress doors are custom-fabricated to suit transit system requirements. Typically, these doors provide unobstructed openings in the range of 4'x 10'. Please contact ACUDOR for more information on sizes, live load ratings, and optional features. U.S.A.: infoisacudor.com / 800.722.0501 CANADA: info@acudor.ca / 844.228.3671 INTERNATIONAL: info@acudorintl.com / 905.428.2240 MEXICO: infomx@acudor.com/ +521 (844) 101-0081 SITE: www.acudor.com Product specifications may change without notice. Acudor is a registered Trade Mark ©2019