ACTiTube40S LED Tube light – 230V – Ø40 mm – stainless steel finish ACTiTube40S is ideal for general lighting in workplaces and living spaces, labbies and hallways, utility areas, and parking garages. Mounted with clamps feauturing variable center-tocenter spacing and 360° light beam adjustment. Available in 4 different lengths and various power ratings.  Direct connection to 230V without external driver : more reliable and quicker to install  Compact, lightweight, waterproof, and durable  Even lighting along the entire length  Linkable version, with through-cable  Easy to clean (smooth surface) Tube Filters End caps Clear or opal UV-stabilized polycarbonate Colored gelatin filters (optional) 316L stainless steel end caps and gland ©ݐְݑكɰݑڰݑҰݑ۰ݑ pݐڰݑ°ݑְݑٰݑٰݑΰݑ°ݑڰݑ, ҰݑڃɰݑѰݑְݑΰݑbĎèݑްݑ°ݑ Ұݑưݑΰݑٰݑְݑ ڰݐ۰ݑΰݑpݑ°ݑϰݑܰݑ Overall lengths, non-linkable version, excluding wiring. See the mechanical specifications for the dimensi

Photometric characteristics Photometric distribution Photobiological risk Group 0 (no risk) Opal version LDT files are available for each product version. Other specifications Electrical specifications Mechanical specifications Non-linkable tubular 1 cable gland Linkable tubular internal cable entry, 2 cable glands 2 Typical luminous flux at full power, 4000K, opal tube. 3 Maximum temperature for full-power versions. Higher for lower power ratings : please contact us.

ACTiTube40S The total power of a chain-connected tubular lighting system must not exceed 1000 W The maximum length of the chain connection, including the cable, must not exceed 150 m. WIRING Non-linkable tubular lights Linkable tubular lights Ships unwired. See wiring options. Ships unwired. See wiring options. 2X 1,5 mm² cable runs through the interior of the tube. With the factory wiring option, cable exit is available at the rear of the tubular cable, either centered or off-center (illustration) : please contact us INSTALLATION AND MOUNTING ACTiTube40S tubular units connect directly to 230...

References Description 1253003000 316L stainless steel clamp with screw. Width : 20 mm. Stainless steel hex socket head screw with washer. Mounting hole : 4,5 mm 1253003020 316L stainless steel clamp with vandal-resistant screw. Width : 20mm. Tamper-resistant stainless steel screw with washer. Mounting hole : 4,5mm Adjustable suspension cable with mounting screw 1255007010 Length : 1,25 m 1255007000 Length:3 m 1253009010 Adjustable stainless steel bracket. Wall plate 3 mounting points. Adjustable 1253009000 Adjustable stainless steel bracket with support strut. Wall plate with 3 upper mounting...