ACTiTube40E is ideal for commercial lighting in workplaces and living spaces, lobbies and hallways, utility areas, and parking garages. Mounted with clamps featuring variable center-to-center spacing and 360° light beam adjustement. Available in 4 different lengths and various power ratings.  Direct connection to 230V without external driver : more reliable and quicker to install  Compact, lightweight, waterproof, and durable  Uniform lighting along the entire length  Linkable version, with through-cable  Easy to clean (smooth surface) MATERIALS AND FINISHES Tube Filters End caps Clear or opal UV-stabilized polycarbonate Colored gelatin filters (optional) Elastomer (SEBS) Overall length, excluding wiring. See the mechanical specifications for the dimensions of other versions.

Electrical specifications Other specifications Electrical power Power supply Electrical class Power-on Dimming Power factor No inrush current Phase cut-off 0,98 IP protection rating IK protection rating Glow-wire resistance Fire rating Compliance Operating temperature Photometric specifications Photometric distributions Photobiological risk Group 0 (no risk) LDT files are available for each product versions. Calculation of luminous flux ■ Luminous flux (lm) = Efficiency (lm/W) x Power (W) 2 Maximum temperature for full-power versions. Higher for lower power ratings : please contact us. 3 Typical...

CHAINING The total power of a chain-connected tubular light fixture array must not exceed 700 W. The maximum chain length, including the cable, must not exceed 120 m. WIRING Non-linkable tubulars Linkable tubulars Cable : 2X 0,75mm² H05 VV-F Length = 2m See custom wiring option. Through-cable : 2X 0,75mm² H05 VV-F Inlet cable = 2m, outlet cable = 0,2m See custom wiring option. INSTALLATION AND MOUNTING The tubular fixtures are secured using stainless steel clamps, available as accessories. The overall height when mounted with clamps is 54 mm. 54 mm A cable secured to the clamps allows for a suspended...

References Description 1253003000 316L stainless steel collar with scres. whidth 20 mm. Stainless steel hex socket head screw with washer. Trou de fixation de 4,5 mm 316L stainless steel collar with vandal-resistant screw. width 20mm. Tamper-resistant stainless steel screw with washer. Mounting hole 4,5mm 1253009010 Adjustable stainless steel arm. Wall plate with 3 mounting points. Adjustable mounting points and 1 lower mounting point. Adjustable reach from 190mm to 300mm. See dimming offers Phase-cut dimmers controlled by a push button (Push to Dim) or the DALI protocol ORDER REFERENCES Opal...