The ACTiTube40E is ideal for general lighting in workplaces and living spaces, lobbies and corridors, technical areas and car parks. Mounted using clamps with variable centre-to-centre spacing and 360° light beam adjustement. Available in four different lengths and various power ratings. Direct connection to 230V without an external driver : more reliable and quicker to install Compact, lightweight, waterproof and robust Even lighting along the entire length Linkable version, with through-cable Easy to clean (smooth surface) MATERIALS AND FINISHES Tube Filtres Embouts UV-stabilised clear or opal polycarbonate Coloured gelatine sheets (optional) Elastomer (SEBS) Overall length, excluding cabling. See the technical specifications for the dimensions of other versions.
Open the catalog to page 1Electrical specifications Other specifications Power consumption 2 Maximum temperature for full-power versions. Higher for lower power ratings : please contact us. 3 Typical luminous flux at full power, 4000K, opal tube.
Open the catalog to page 2CHAINING The total power of a chain-connected tube array must not exceed 700W. The maximum chain length, including the cable, must not exceed 120 m. WIRING Non-linkable tubular lights Linkable tubular lights Cable : 2X 0,75mm² H05 VV-F Length = 2m See the custom wiring option. Cable : 2X 0,75mm² H05 VV-F Inlet length = 2m, outlet length = 0,2m See the custom wiring option. INSTALLATION AND FIXING The tubular sections are secured using stainless steel clamps, which are available as accessories. The overall height when fitted with a clamp is 54 mm. 54 mm A rope secured to clamps allows for a suspended...
Open the catalog to page 3Description 316L stainless steel collar with screw. Width : 20 mm. Stainless steel hexagon socket head screw with washer. 4,5 mm fixing hole 316L stainless steel collar with vandal-proof screw. Width : 20mm. Tamperproof stainless steel screw with washer. 4,5mm fixing hole Adjustable stainless steel bracket. Wall plate with 3 fixing points. Adjustable projection from 190 mm to 250 mm. Adjustable stainless steel bracket with support strut. Wall plate with three upper fixing points and one lower fixing point. Adjustable offset from 190 mm to 300 mm. Phase-cut dimmers controlled by a push-button...
Open the catalog to page 43 Pages
5 Pages
4 Pages
5 Pages
4 Pages
3 Pages
4 Pages
3 Pages
4 Pages
2 Pages
2 Pages
5 Pages
4 Pages
4 Pages
2 Pages
5 Pages
4 Pages
4 Pages
26 Pages
6 Pages
4 Pages
6 Pages
4 Pages
5 Pages
4 Pages
7 Pages
5 Pages
5 Pages
5 Pages
4 Pages
3 Pages
4 Pages
4 Pages
4 Pages
4 Pages
2 Pages