ACTiTube20A LED Tube- 230V - 020 mm ACTiTube20A is ideal for outdoor accent, wayfinding traffic, or architectural lighting. Mounts using clamps or a flexible bracket with variable center-to-center spacing for 360° light beam orientation. Available in 2 power levels. ■ Direct connection to 230V without an external driver : more reliable and faster to install ■ Compact, lightweight, waterproof, and rugged ■ Uniform lighting along the entire length ■ Versions with a 30° or 60° focused beam ■ Linkable version, with through-cable ■ Easy to clean (smooth surface) Tube Clear opal UV-stabilized polycarbonate Filters Colored gel filters (optional) End caps PA66 polyamide end caps and cable glands 1 Overall length, non-linkable version, excluding wiring. See the mechanical specifications for the dimensions of other versions.

Other specifications Electrical specifications Electrical class Class II Power-on No inrush current Dimming Phase-cut Photometric characteristics 30° AND 60° narrow beam versions Luminous flux3 |1580 lm/m (opal) Luminous flux3 1750 lm/m (30° lens) Photobiological risk Group 0 (no risk) Photometric distribution Calculation of luminous flux ■ Luminous flux (lm) = Efficiency (lm/W) x Power (W) Opal poycarbonate tube Clear poycarbonate tube Clear polycarbonate tube, 30° beam angle Clear polycarbonate tube, 60° beam angle Mechanical specifications 2 Maximum temperature for full-power versions. Higher...

Non-linkable tubular 1 cable gland Linkable tubular Internal cable entry, 2 cable glands Wiring Non-linkable tubular Cable : 2X 0,75mm2 H07 RN8-F Length = 2m See custom wiring option. Linkable tubular Feed-through cable : 2X 0,75mm2 H07 RN8-F Incoming length = 2m, outgoing length = 0,2m See custom wiring option. ACTiTube20A tubular lights are mounted using clamps or brackets and connect directly to a 230 VAC power source. For outdoor installation, the light fixture must be protected by a surge arrester, available as an accessory. The total power of a chain-connected tubular lamp array must not...

ACCESSORIES References Screw-on steel bracket. Width : 10mm. White galvanized steel. Mounting hole : 4,5mm 304 stainless steel clamp and mounting base. Clamp : 4,6 x 127mm. Tensile strength : 890N. Screw-on mounting base : 18 x 18 x 8mm. Mounting hole : 4mm 304 stainless steel clamp and UV-treated black plastic mounting base. Clamp : 4,6 x 127mm. Adhesive mounting base : 25 x 25 x 6 mm. Waterproof connectors : 230V/16A - 2 Poles - IP68 – male and female Dimensions : 20 x 65mm et 20 x 71mm - 1/4 turn quick lock – supplied unwired Distribution box, 230V/16A - 2 Poles - IP68 1 input, 2 outputs Straight...

Order references Opal polycarbonate Clear polycarbonate Clear polycarbonate, 30° beam angle Clear polycarbonate, 60° beam angle Option Description Lx Custom cable : specify the length w in meters FCxx5 Color filter (see codes below) Dark blue filter Light blue filter Green filter Length 1562mm, linkable, 4000K, power 19.5W, opal polycarbonate tube 5 The color filter option is not available for PC30 or PC60 spotlights.