Miii TERTIAIRE ]K05 ACTiLine4388H is a dual-beam LED luminaire designed to provide both indirect (upward) and direct(downward) lighting. It is particularly well-suited for meeting rooms and offices. Available in various lengths, as well as different diffuser versions. ACTiLine4388HA Wall light ACTiLine4388HS Suspended Each LED light source (top, bottom) can be controlled either simultaneously or separately. This allows you to set up different usage scenarios. For example, using a video projector in a meeting room : ■ Ambient lighting (indirect) on ■ Table lighting (direct) off or at very low brightness, controlled by a push button or DALI n, In.irp In addition to these standard products, CONTINUES custom projects are available featuring continuous lines and angular shapes. Body Aluminum profile Color Natural anodized gray (standard) Glossy white RAL9016 Matte black RAL9005 Or other colors according to the RAL color chart Direct diffuser Opal PMMA Anti-glare polycarbonate Louvre UGR < 16 Indirect diffuser Opal PMMA

Other specifications Electrical specifications Electrical power Direct : 22 W/m Power supply unit integrated to the profile Electrical class Class I Glow wire resistance Polycarbonate : 850°C Flicker Flicker-free Dimming With DALI option : Photometric specifications Photometric distributions Photobiological risk Group 0 (no risk) Direct : Anti-glare / Indirect : Opal LDT files are available for each product versions. Calculation of luminous flux ■ Lu minous flux (lm) = Efficiency (lm/W) x Power (W) Efficiency (lm/W) Anodized gray Glossy white profile Matte black profile Opal PMMA (direct) 123...

Mechanical specifications References Width Height Length Suspension cables3 ACTiLine4388S600... 43 mm 88,4 mm 610 mm 2 Available as continuous lines and angular shapes : see section at the end of this document Suspension mounting : a cable that bundles the connections from each LED source, exiting from the top of the profile. Cross-sectional area : 5G 0,75mm2, length = 2m (standard) or custom (optional). Wall mounting : a cable that bundles the connections from each LED source, exiting from the center of the back of the profile. Cross-sectional area : 5G 0,75mm2, length = 1m (standard) or custom...

A Wall light S Suspended References DescriptionHanger, Y-shaped clip, with adjustable cord (single unit) 1255031000 Length : 1,25 m Other length : contact us wrench (single unit) Contact us Male connector, 5 poles, white, IP20, 76x48x15mm. Contact us Female connector, 5 poles, white, IP20, 76x48x15mm. PCAE Anti-glare polycarbonate Length Direct / Indirect Available options Code Description Code Custom cable : specify length x in meter Independent direct/indirect dimming Cable outlet at the rear and in the center Natural anodized gray profile, suspension mounting, length 1170 mm, 4000K, power...

CUSTOM PROJECTS – CONTINUOUS LINES AND ANGULAR SHAPES EXTRA-LONG RAMPS Available lengths start at 3400 mm and increase in increments of 560 mm4. Each ramp can consits of : • A starting section (with 230V connection) • None, one, or more intermediate sections (with or without connections) • An ending section (with or without a connection) The elements are connected using mechanical connectors the diffusers are supplied in 15 meter rolls to facilitate installation and ensure perfect light continuity. ANGULAR LIGHT FIXTURES The available lengths for each segment start at 600 mm and increase in increments...