*myarchiexpo

Catalogs
ABK InnoVent
Pricelist ABK 2016

Pricelist ABK 2016

Product catalog summary

Specifications:
The document details various models of island and wall extractor hoods, including dimensions, capacity, power consumption, and exhaust specifications. It covers options for shaft height and recirculation systems, motor capacities, and installation types affecting noise levels and efficiency.

Procedures:
Installation guidelines emphasize adequate air supply and motor capacity, recommending air exchange 10-20 times the space volume per hour. For larger cooking surfaces, segmented air extraction with twin controls and motors is advised.

Norms and Recommendations:
Extractor hoods should be larger than the cooking area, maintain specific distances from cooking surfaces, and use acoustically insulated ducts to reduce noise with external motors.

Ventilation Technology:
External motors are recommended for better air extraction and lower noise. Non-return valves prevent cold air entry and reduce noise. The CMVR® system is highlighted for central mechanical ventilation.

Overview:
The document discusses ventilation systems, focusing on recirculation and CMVR® technologies for kitchen extractor hoods, highlighting energy efficiency and indoor air quality benefits.

Recirculation System:
This system filters cooking vapors using grease and carbon filters, returning clean air to the kitchen, suitable for induction cooking.

CMVR® System:
Combines recirculation with partial extraction through a central ventilation system, maintaining balanced ventilation and energy efficiency.

Technical Specifications:
Details on motors and installation setups, emphasizing appropriate duct sizes and configurations for efficiency.

Installation Recommendations:
Guidelines for recirculation and CMVR® systems, advising consultation with specialists for tailored solutions.

Maintenance and Replacement:
Charcoal filters should be washed every two months and replaced after 15 washes.

Conclusion:
Emphasizes choosing the right ventilation system for energy efficiency and indoor air quality, recommending specialist consultation.

Specifications and Components:
Details on motors, cables, ducting components, flat ducts, grilles, outlets, and worktops, with recommendations on duct length and bends affecting efficiency.

Pricing and Options:
Pricing for components and worktops, with surcharges for specific finishes and dimensions.

Specifications:
Configurations of cooking appliances, including burner types and power outputs, with guidelines for custom cooktop layouts.

Procedures:
Conversion kits for gas and LPG, spiral burners, and wok burners with broad power ranges.

Norms and Recommendations:
Stainless steel pan stands discolor over time; black enamelled options are available.

Worktops and Tables:
Dimensions and pricing for stainless steel worktops and tables, with options for thickness and finishes.

Induction Cooking:
Induction elements with slider touch controls and power boost capabilities.

Additional Options:
Surcharges for custom finishes and features.

Specifications:
Configurations for gas and induction cooktops, focusing on the i-Cooking series, with burner types and power outputs.

Procedures and Installation:
Guidelines for custom cooktop layouts and installation processes.

Standards and Recommendations:
High efficiency and quality standards, with customization options.

Options and Accessories:
Optional features and accessories, including conversion kits.

Design and Customization:
Flexibility in designing custom cooktops and integrating kitchen appliances.

Key Data from Tables and Charts:
Tables listing dimensions, power outputs, and configurations, with pricing information.

Overview:
Specifications and guidelines for i-Cooking gas and induction cooktops, including burner types and installation options.

Burner Types:
Various burner types with power ranges, designed for specific cooking needs.

Design Guidelines:
Guidelines for custom installations, emphasizing power and distance requirements.

Installation Options:
Configurations for different worktop materials and thicknesses.

Testing and Performance:
Test results showing low worktop heating and high performance.

Induction Cooktops:
Features of the i-Cooking induction system, including safety features.

Accessories and Customization:
Range of accessories and custom design options.

Conclusion:
The i-Cooking system offers versatile and efficient solutions for modern kitchens.

Specifications:
Construction materials and components, including edges, corners, and inner construction.

Options and Pricing:
Customization options and pricing based on quantity.

Frame Specifications:
Made-to-measure frames with various options.

Sub-frames and Splashbacks:
Specifications and installation guidelines.

Lighting and Handles:
Specifications for strip lights and handles.

Wine Racks and Service Parts:
Configurations and service parts details.

Terms and Conditions:
Metaalunie Terms and Conditions, including offers, intellectual property, delivery, risk, price changes, force majeure, scope of work, changes, performance, completion, liability, warranty, and payment terms.

Catalog excerpts

i-Cooking and cooking applications PRICELIST CORE RANGE 2016

Open the catalog to page 1

Symbols Electronic control 4 speed and lighting digital indicator delayed auto-off after app. 20 min Internal motor | High pressure 2-sides extracting axial EC motor capacity per hour Remote control see above at Electronic control LED standard round 2.2W diffused lighting |quantity varies per extractor CMVR® Hybrid extractor for Central Extraction Ventilation systems. Extractor depth Different depths available, also for extra deep worktops RAL powder coated Some extractors are optionally available in RAL colour(s) Standard metal grease filter 12-layered | dishwasher proof Dimmer Always dimmable...

Open the catalog to page 2

EXTRACTOR HOODS Ventilation Technology Recirculation versus CMVR system 38 External indoor motor 45 Flat roof motor 47 Tiled roof motor 48 Outside wall motor 49 Grilles | Wall ducts 58 4mm solid stainless steel 62 Other stainless steel worktops & Tables 69 i-Cooking ICGX | Stainless steel worktops 75 i-Cooking induction | Stainless steel worktops 77 Worktop and Table options 83

Open the catalog to page 3

Extractor hoods

Open the catalog to page 4

As from 2015, practically all ABK extractors are equipped with the newest energy efficient direct current motors [EC]. The great advantage of these motors is that they use up to 80% less energy and produce even less noise. With these advanced EC motors we are again taking the lead as the ventilation specialist and are complying with the statutory requirements. We will use the two extremely pressure resistant motors shown below: • 815m3/h • 1080m3/h The flat outside wall motor GABK240AP 1200m3/h is replaced by an EC version rated at 1075m3/h. All our extractors equipped with an EC motor also have...

Open the catalog to page 5

NEERIM | Ceiling unit Order code Description [WxDxT] INDEX 82x50cm for use with external EC motor* [order separately] PA07082RZL* RAL9010** Ceiling unit 82x50x4,5+12,5cm for use with external motor 1316 Lighting 2x2.2W | 2 filters | Power consumption: motor + 4.4W PA07082RZ* Stainless steel Ceiling unit 82x50x4,5+12,5cm, as above 1417 With a universal outlet positioned to the left, right, top, front or rear 82x50cm Internal EC motor PA07082HZL RAL9010** Ceiling unit 82x50x4,5+24cm | Internal EC motor 815m3/h 1645 lighting 2x2.2W | 2 filters | Power consumption 104.4W PA07082HRZ Stainless steel...

Open the catalog to page 6

NEERIM | Ceiling unit Order code Description [WxDxT] INDEX 150x50cm for use with external EC motor* [order separately] PA07155RZL* RAL9010** Ceiling unit 150x50x4,5+12,5cm for use with external motor 2186 lighting 4x2.2W | 2 filters | Power consumption: motor + 8.8W PA07155RZ* RVS Ceiling unit 150x50x4,5+12,5cm, as above 1857 With a universal outlet positioned to the left, right, top, front or rear 150x70cm for use with external EC motor* [order separately] PA07157RZL* RAL9010** Ceiling unit 150x70x4,5+12,5cm for use with external motor 2186 lighting 4x2.2W | 2 filters | Power consumption: motor...

Open the catalog to page 7

NEERIM | Made-to-measure ceiling unit Variable depth 50-94cm, deeper on request. For use with external EC motor [order separately] | Connection Ø200mm Power consumption: motor + lighting [W] round LED spots Note: high location results in faster accumulation of grease deposits due to grease The condensation on the stainless steel panels. We therefore recommend that you regularly clean the panels and extraction vents of the extractor hood. remote contr. metal filter custom made metal filter custom made KESET40904 Lighting extension set | 4 spots + wiring dimmable with Remote Control | max. 8 spots...

Open the catalog to page 8

NEERIM | Wall Order code Description [WxDxT] INDEX Wall unit Dimensions Filters LED spots | 2.2W PA07056RZ 56x25x31cm 2 2 1535 With internal EC motor 815m3/h Finish Connection Ø150mm [on top] | Power consumption 100W + lighting | Round LED spots | Remote control As above. Version for external motor 1354 As above. Version for recirculation [integrated] 1716 Incl. 2 charcoal filters PAKF04 Wall unit Dimensions Filters LED spots | 2.2W 86x25x15+29cm 2 2 1582 860 Internal EC motor 815m /h | Connection Ø150mm [on top] Power consumption 100W + lighting | Circular LED spots Remote control Version for...

Open the catalog to page 9

NEERIM Made-to- neasure wall ur Order code Description [WxDxT] EA03xyz Wall unit | Width up to: Dimensions Filters Panels LED spots 12.2W * 1 functional panel | Width of cooking area max. 120cm Specify [L] left or [R] right functional panel Finish: Internal EC motor 815m3/h | Connection 0150mm Power consumption 100W + lighting | Circular LED spots Remote control NEERIM made-to-measure wall unit I 236x25x15 +29cm Reduction | Surcharge INDEX A03KVZ Ext. light connection + power plug [own transformer] +/+ 25 PSEM2 Version for external motor | Connection 0200mm - / - 329 REC01A Recirculation version...

Open the catalog to page 10

Dimensions [mm] Order code Description [WxDxT] 50cm deep Wall extractor hood Dimensions Filters LED spots Wall extractor hood Dimensions Filters LED spots | 2.2W * Shaft position | spacing 600mm, cooking area width max. 120cm Specify motor [L] left or [R] right Internal EC motor 815m3/h | Connection 0150mm Power consumption 100W + lighting | Circular LED spots KILPA I Made-to-measure extractor hood 210x60x12cm built-under. PSSM09 Replacement shaft any height < 1000mm

Open the catalog to page 12

Order code KILPA Made-to- neasure wal Description [WxDxT] EA20xyz Wall extractor hood * Shaft position | spacing 600mm, cooking area width Specify motor [L] left or [R] right ** With 9 or more spots and single control, lighting is NOT dimmable Internal EC motor 815m3/h | Connection 0150mm Power consumption 100W + lighting | Circular LED spots Single shaft 302x302mm height made-to-measure < 1000 mm Other made-to-measure options on request Reduction | Surcharge INDEX PSEM Version for external motor | Connection 0200mm -/- 181 PADBDIM Twin controls + twin motor +/+ 896 PASP Set of supports made-to-measure...

Open the catalog to page 13

KILPA | Island Dimensions [mm] PA90180ES 180x65x10cm 4 6 Version with twin controls, motors and shafts PA90110ES 110x110x10cm 4 6 Only external motor, minimum 1080m3/h | Order separately Connection Ø200mm, shaft 37.5x37.5cm Finish: Internal EC motor 815m3/h | Connection Ø150mm Power consumption 100W + lighting | Circular LED spots Shaft height 800mm | Optionally 750 or 850mm, No add. cost With shafts higher than 1750mm we recommend using a clamping system or a shaft support for stability. [additional cost] KILPA | Made-to-measure island extractor hood 240x60x12cm twin shaft PSSM09 Replacement...

Open the catalog to page 14

Pricelist ABK 2016

Pricelist ABK 2016

Catalog excerpts

All ABK InnoVent catalogs and technical brochures