Catalogs >
ABES S.à r.l. Public Design >
ABES Lighting Bollard 220 LED

ABES Lighting Bollard 220 LED
1Pages

Catalog excerpts

LED Lighting bollard No risk of ck electric sho 4V ADVANTAGES AT A GLANCE Significantly lower power consumption by LEDs Considerably longer life than conventional light sources LED unit is replaceable No risk of electric shock, since low voltage The junction piece can be replaced in a few minutes only Quick disassembly for short-term space requirements Ground shell can be covered, therefore no risk of tripping LIGHTING-BOLLARD 220 LED Cast aluminium | 180 · 600 mm Specifications Fully cylindrical lighting bollard made from cast aluminium with a flat top. With LED lighting in the lower section, 1 LED strip of 21 LEDs and Perspex diffuser (PMMA). Operated with 24 V low voltage, 2 m connector cable with plug coupling in the base. Protection type IP 67. Mounting Available only with 3p-Technology Finish Powder coating in standard RAL colours or DB 703 Technical information ·· Light unit: 1 LED strip of 21 LEDs ·· Power supply: 24 Volt DC ·· Power input: 3 W ·· Luminous flux: approx. 320 lm ·· Reflected beam angle: vertical 360°, horizontal approx. 120° ·· Light colour: 6000 K, 4000 K or 2700 K ·· Protection type: IP 67 Lighting-Bollard 220 LED 6000 K cool white Lighting-Bollard 220 LED 4000 K neutral white Lighting-Bollard 220 LED 2700 K warm white Detailed information can be found on the catalogue’s back cover fold-out

Open the catalog to page 1

ABES Lighting Bollard 220 LED 1Pages

Catalog excerpts

All ABES S.à r.l. Public Design catalogs and technical brochures

ABES Lighting Bollard 220 LED
1Pages