Electrical installation solutions for buildings Product news 2020
196Pages

{{requestButtons}}

Catalog excerpts

Electrical installation solutions for buildings Product news 2020 - 1

MVP CATALOG Electrical installation solutions for buildings Product news 2020 © • Residual current devices • Arc Fault Detection Devices • Accessories for MCBs and RCDs • Protection and safety • Command and signaling • Control and automation • and more ...

Open the catalog to page 1
Electrical installation solutions for buildings Product news 2020 - 2

This special supplement to the catalog “Electrical installation solutions for buildings“ brings you information about new products which are coming in 2020: that will complement the ABB product portfolio and our offering of installation solutions for buildings. The catalog contains product descriptions and important technical and ordering information.

Open the catalog to page 2
Electrical installation solutions for buildings Product news 2020 - 3

Residual current devices 1 Arc Fault Detection Devices 31 Accessories for MCBs and RCDs 33 Industrial plugs and sockets 85 Light switches and socket outlets 109 Consumer units

Open the catalog to page 3
Electrical installation solutions for buildings Product news 2020 - 4

— RCBO DS201 Compact solutions for a complete protection Easy to install Bi-directional cylindrical terminal ensure higher safety of connecting operations, making them easier. Test pushbutton Test pushbutton to verify the correct functioning of the device. Anti counterfeiting DS201 is equipped with a tag RFid in order to authenticate the product. Laser printed information Information on the device are laser printed to ensure readability over time. Earth fault indicator Blue flag on the toggle to identify earth fault trips. I 0N – 0 0FF indication molded on the toggle. Contact position...

Open the catalog to page 4
Electrical installation solutions for buildings Product news 2020 - 5

Easy installation The terminals available on DS201 make easier the supply operation in parallel with cables and busbars as they are composed by two different seats: a front seat for 25 mm2 cables and a back seat for 10 mm2 busbars. Supply is possible either from top or bottom side. Mounting clip Stable fixing on DIN rail, easy and fast mounting and dismounting operations thanks to the standard mounting clip. Display the operational status Easy troubleshooting and reduced downtime for maintenance operations thanks to both the blue indicator, that signals the differential tripping to...

Open the catalog to page 5
Electrical installation solutions for buildings Product news 2020 - 6

ELECTRICAL INSTALLATION SOLUTIONS FOR BUILDINGS 2CHC 419 006 C0201 RCBOs DS201 Technical features DS201L Electrical features Type (wave form of the earth leakage sensed) Overvoltage category Pollution degree Operating voltage of circuit test Ut Rated frequency Rated breaking capacity acc. to IEC/EN 61009-1 Rated breaking capacity acc. to IEC/EN 60947-2 (only referring to short circuit test) Rated residual breaking capacity IAm according to EN 61009-1 Rated residual breaking capacity IAm according to IEC 61009-1 Rated impulse withstand voltage (1.2/50) Uimp Dielectric test voltage at ind....

Open the catalog to page 6
Electrical installation solutions for buildings Product news 2020 - 7

Insulation group I - II, RAL 7035 Insulation group II, Black RAL 9005, sealable in ON-OFF positions Green/Red Window Blue flag on toggle 10000 20000 IP4X IP2X 25g - 2 shocks - 13ms Insulation group I - II, RAL 7035 Insulation group II, Black RAL 9005, sealable in ON-OFF positions Green/Red Window Blue flag on toggle 10000 20000 IP4X IP2X 25g - 2 shocks - 13ms Insulation group I - II, RAL 7035 Insulation group II, Black RAL 9005, sealable in ON-OFF positions Green/Red Window Blue flag on toggle 10000 20000 IP4X IP2X 25g - 2 shocks - 13ms 0.1 mm or 1 g - 20 cycles at 5...150...5 Hz 0.1 mm or...

Open the catalog to page 7
Electrical installation solutions for buildings Product news 2020 - 8

ELECTRICAL INSTALLATION SOLUTIONS FOR BUILDINGS RCBOs DS201 Technical features DS201L DS201 Installation Terminal type Terminal size for cables top / bottom mm2 Terminal size for busbars top / bottom mm2 Tightening torque top / bottom Nm Stripping length of the cable mm Mounting position Supply from Dimensions Dimensions (H x D x W) mm Combination Combinable with Auxiliary contact with auxiliary accessories and Signal contact / auxiliary elements auxiliaries contact Shunt trip Auxiliary contact for bottom fitting Undervoltage release Overvoltage release failsafe bi-directional cylinder-lift...

Open the catalog to page 8
Electrical installation solutions for buildings Product news 2020 - 9

failsafe bi-directional cylinder-lift terminal (shock protected) 25/25 10/10 2.8 12 on DIN rail EN 60715 (35mm) by means of mounting clip Any Top/Bottom terminals 85 x 69 x 35 200 failsafe bi-directional cylinder-lift terminal (shock protected) 25/25 10/10 2.8 12 on DIN rail EN 60715 (35mm) by means of mounting clip Any Top/Bottom terminals 85 x 69 x 35 200 failsafe bi-directional cylinder-lift terminal (shock protected) 25/25 10.X 02. VIII 12 on DIN rail EN 60715 (35mm) ' by means of mounting clip Any Top/Bottom terminals 85 x 69 x 35 200

Open the catalog to page 9
Electrical installation solutions for buildings Product news 2020 - 10

ELECTRICAL INSTALLATION SOLUTIONS FOR BUILDINGS 2CHC 419 006 C0201 DS201 L145001 A y type, C characteristic Function: protection of end user single-phase circuits against overload and short-circuit currents; protection against the effects of sinusoidal alternating and direct pulsating earth fault currents; protection against indirect contact and additional protection against direct contact (IAn=30 mA). Application: residential, commercial, industrial. Standard: IEC/EN 61009-1; IEC/EN 61009-2-1 Icn = 4500 A poles residual Rated current Type code Order code Weight Pack

Open the catalog to page 10
Electrical installation solutions for buildings Product news 2020 - 11

RCBOs DS201 DS201 L145001 AC 0 type, C characteristic Function: protection of end user single-phase circuits against overload and short-circuit currents; protection against the effects of sinusoidal alternating earth fault currents; protection against indirect contact and additional protection against direct contact (IAn=30 mA). Application: residential, commercial, industrial. Standard: IEC/EN 61009-1; IEC/EN 61009-2-1 Icn = 4500 A poles residual Rated current Weight Pack Type code Order code

Open the catalog to page 11
Electrical installation solutions for buildings Product news 2020 - 12

ELECTRICAL INSTALLATION SOLUTIONS FOR BUILDINGS RCBOs DS201 DS201 |6ooo| A y type, B characteristic Function: protection of end user single-phase circuits against overload and short-circuit currents; protection against the effects of sinusoidal alternating and direct pulsating earth fault currents; protection against indirect contact and additional protection against direct contact (IAn=30 mA). Application: residential, commercial, industrial. Standard: IEC/EN 61009-1; IEC/EN 61009-2-1 Icn = 6000 A No. of Rated poles residual Rated current Type code Order code Weight Pack

Open the catalog to page 12

All ABB Home and Building Automation catalogs and technical brochures

  1. Zenit

    200 Pages

  2. Millenium

    64 Pages

  3. Smarter Home

    32 Pages

  4. Light switches

    56 Pages

  5. Create smarter

    40 Pages