STAINLESS STEEL SHELVING SYSTEMS
20Pages

– function and flexibility in shelving SHELVING SYSTEMS

– function and flexibility in shelving We enjoy a challenge…. Today the demands for functional, flexible shelving designed to meet all sorts of individual requirements are greater than they have ever been. That’s a challenge that brings a smile to our faces at Hyllteknik. Because flexibility is built into our concept: stainless steel shelving versatile enough to satisfy virtually any need. And when it doesn’t, we simply manufacture to your individual specifications. The pictures in this catalogue show our various standard systems, manufactured in brushed EN 1.4301 stainless steel. We hope...

WALL SYSTEM

– function and flexibility in shelving FLEXIBLE WALL SYSTEM FACTFILE 10000 RF Support rails stainless steel (s/s): 10012 RF 10016 RF 10019 RF 10028 RF Support rail s/s 1220 mm Support rail s/s 1670 mm Support rail s/s 1900 mm Support rail s/s 2800 mm 10100 RF Uprights stainless steel (s/s): 10113 RF 10120 RF Suspended upright s/s 1237 mm Suspended upright s/s 1951 mm Beech strip Birch strip Oak strip Beech strip Birch strip Oak strip A truly rational solution. Quick, simple and with the lowest possible installation costs. Simply screw the support rail in place and hook on the uprights. It’s...

WALL SYSTEM

– function and flexibility in shelving PERMANENT WALL SYSTEM Upright s/s Upright s/s Upright s/s Upright s/s Upright s/s Upright s/s Upright s/s Upright s/s Upright s/s Our simplest storage system for general use. Strong, simple and flexible with uprights that are screwed directly into the wall. This was the first stainless steel system developed by Hyllteknik back in 1966 – and has remained a bestseller ever since! Screws for uprights: 10 screws per pack 11000 TRF Screws for wood 11000 BRF Screws for concrete/masonry 11000 ERF Screws for plasterboard We do not recommend installation on...

WALL SYSTEM

– function and flexibility in shelving STEPLESS WALL SYSTEM FACTFILE 11000 RFC C-upright in stainless steel (s/s): 11004 RFC 11006 RFC 11008 RFC 11010 RFC 11015 RFC 11018 RFC 11020 RFC 11000 RFC C-upright s/s 400 mm C-upright s/s 600 mm C-upright s/s 800 mm C-upright s/s 1000 mm C-upright s/s 1500 mm C-upright s/s 1800 mm C-upright s/s 2000 mm C-upright s/s: per metre (max 2 m) 26000 RFC C-bracket in stainless steel (s/s): 26017 RFC 26021 RFC 26027 RFC 26037 RFC 26047 RFC 26057 RFC C-bracket s/s C-bracket s/s C-bracket s/s C-bracket s/s C-bracket s/s C-bracket s/s Wherever hygiene is the...

SHELF SYSTEM

– function and flexibility in shelving FREE-STANDING SHELF SYSTEM FACTFILE 15000 RF L-frame, Stainless steel: 15014 RF 15016 RF 15018 RF 15020 RF L-frame/stainless L-frame/stainless L-frame/stainless L-frame/stainless 19600 RF T-frame, Stainless steel: 19614 RF 19616 RF 19618 RF 19620 RF T-frame/stainless T-frame/stainless T-frame/stainless T-frame/stainless Use the L- and T-shaped frames to make the most effective use of floor space. Both systems are free-standing, so there is no need to fix them to the wall. Simply extend left or right by adding as many sections as your storage needs...

B600000 RF Stainless steel shelf with straight shelf ends, complete. Depth: 250, 300 and 400 mm. Width: 800 and 900 mm. B600000R RF Stainless steel shelf with rounded shelf ends, complete. Depth: 250, 300 and 400 mm. Width: 800 and 900 mm. 60000 RF Stainless steel shelf for bracket Depth: 250, 300, 400 and 500 mm. Width: 800, 900 and 1000 mm. Stainless steel wire shelf Depth: 300 and 400 mm. Width: 600, 800 and 900 mm. Stainless steel wire basket Depth: 300 and 400 mm. Width: 600, 800 and 900 mm. Special shelves We can produce a variety of shelves in stainless steel according to your...

35000 RF Single-pressed, stainless steel bracket. Supplied in pairs. Depth: 170, 210, 270 and 370 mm. 35127 RF Single-pressed, stainless steel bracket with rounded ends. Supplied in pairs. Depth: 270 mm. 20000 RF Stainless steel bracket. Depth: 120, 170, 210, 270, 370 and 470 mm.

– function and flexibility in shelving FACTFILE Capacity Recommended max. load: 150 kg per shelf. Under test conditions the following maximum distortion was measured in the centre of a 900 x 400 mm shelf: 100 kg – 2 mm 200 kg – 4 mm 300 kg – 6 mm INDUSTRIAL RACKING Rigid, robust, stainless steel racking with six shelves in each section. Assembled on site using Hyllteknik’s own unique system. This racking can also be fitted with wine racks. Flexible, strong and fully extendable. See sketch below. Please note! Each fully assembled section adds 30 or 60 mm onto the shelf length, depending on...

– function and flexibility in shelving FACTFILE 69200 RF Hat rack stainless steel (s/s): 69206 RF 69209 RF 69216 RF 69219 RF 69226 RF 69229 RF 69236 RF 69239 RF 69220 Hat rack 600 mm beech + s/s Hat rack 900 mm beech + s/s Hat rack 600 mm birch + s/s. Hat rack 900 mm birch + s/s Hat rack 600 mm oak + s/s Hat rack 900 mm oak + s/s Hat rack 600 mm/stainless Hat rack 900 mm/stainless Extra hook for hat rack 69100 RF Shoe rack stainless steel (s/s): 69106 RF 69109 RF 69116 RF 69119 RF 69126 RF 69129 RF 69136 RF 69139 RF Shoe rack 600 mm beech + s/s Shoe rack 900 mm beech + s/s Shoe rack 600 mm...

– function and flexibility in shelving FACTFILE Tabletops: 28 mm thick tabletop with white high-pressure laminate to offer the very best resistance against scratches and daily wear and tear. Edging strips in overlaminated solid beech. Tops also available in other materials. Prices on request Underframe max. 2200 mm long. UNIVERSAL TABLES Hyllteknik’s universal tables, which have for many years been manufactured in standard steel, are now also available in stainless steel. Tables are supplied with or without a shelf frame. Legs come in two heights, suitable for sitting or standing. You...

- function and flexibility in shelving Visitors' address:D E-mail: kundservice@hyllteknik.se • Homepage: www.hyllteknil- Production: Grappa RekD