NOVATION ARCHITECTURAL METAL Glass Clamps Da Vinci Clamp System Handrail Brackets Slotted Tube System Rope System irror Polished System Stainless Steel Handrail Systems

This catalogue contains details of the range of handrail products available from Aalco. Extensive UK stocks are backed by a bigger range held by the manufacturer, IAM Design. All items are available on very short lead times. If you cannot find what you are looking for, please contact your local Aalco Service Centre (details on the back cover) or visit the Aalco website. Please note: Satin Polish finish is not suitable for use outside in coastal locations nor for swimming pools either indoors or outside. For these types of application, items should be selected from the Grade 316 Mirror Polished...

MIRROR POLISHED TUBES HANDRAIL TUBE Aalco stocks the following items with a satin 240 Grit or 320 Grit polished O/D: (See Slotted Tube also on page 25.) Grade AISI 304 (1.4301) MIRROR POLISHED ROUND BARS 320 GRIT SATIN POLISHED BAR Grade AISI 304 (1.4301)

IAM Design’s glass clamps are available in a large range of different sizes and shapes, allowing the user to choose between different designs and purposes. The glass clamps are supplied with the correct rubber inserts - appropriate for the specified thickness of glass. Being modular, the system allows the mixing of components in order to obtain the most suitable combination for each project. The coding system for the components reflects this modularity, making it easy to identify the different features of the glass clamps. Anchorage Surface Glass Thickness Please note: Satin Polish finish is...

More secure from now on! Ind.i.a spa has tested and certified a large number of glass clamps including the Da Vinci Clamp System. The company has obtained TUV’s approval and certification. TUV is known worldwide as one of the most demanding agencies for quality control. Approval was gained according to DIN/EN 12600 safety standards. HORIZONTAL PRESSURE RESISTANCE This test verifies the possibility of deformation or breakage due to the application of a 3.5 kN load for the duration of one minute. The test is carried out with the force applied at a single point - which is more likely to result in...

Part No. Application Ø A AISI 304 Glass Thickness Part No. Application AISI 304 Glass Thickness Flat back Flat back Flat back Flat back Flat back Flat back Flat back All the above items are also available with a Mirror Polished finish in Grade 316. The product code is as shown but with the initial ‘E’ replaced by an ‘X’.

Glass Thickness Part No. Application AISI 304 Glass Thickness Flat back Flat back Flat back Flat back All the above items are also available with a Mirror Polished finish in Grade 316. The product code is as shown but with the initial ‘E’ replaced by an ‘X’. Mirror polished finish glass clamps See pages 50 - 58 for full range of Mirror Polished items

GLASS CLAMPS ROUND CLAMPS FOR 1 PIECE GLASS ROUND CLAMPS FOR 2 PIECE GLASS Ø 60 10 Part No. Application AISI 304 Part No. Application AISI 304 Flat back Flat back SELF-SUPPORTING GLASS CLAMPS 43

GLASS CLAMPS GLASS CLAMP FOR GROUND ANCHORAGE 2 pieces: anchor flange Ø 100 mm and 3 countersunk holes and holder for 159 mm high glass E2100100 2100200 12.0 & 17.52mm Round support complete with threaded screw and glass attachment 2 pieces: square anchor flange Ø 100 mm with 4 holes and glass clamp with and holder for 180 mm high glass WALL glass clamp 153 30

GLASS CLAMPS GLASS CLAMP INSTALLATIOn Drill a 11mm hole in the tube Use a riveting tool with a M8 rivet Place rubbers of the required thickness within the clamp Fix the support to the tube using a M8 rivet Position the glass against the support Fix the support to the clamp with a M6 screw WARNING Please retain this book - particularly the installation manual. Please read the instruction manual carefully before assembly and installation. Do not forget to act always in accordance with the laws of the intended country of installation. In special cases, please check local and national construction...

DA VINCI CLAMP SYSTEM DA VINCI CLAMP SYSTEM INNOVATIVE GLASS CLAMP W H Y I S I T I N N O V AT I V E ? • The interchangeable clamp can be used with almost any tube • Lateral locking permits use as a single support for glazing panel • The movable clamp permits rotation of the glass around mounted post

DA VINCI CLAMP SYSTEM STAINLESS STEEL CLOSURE FOR ROUND CLAMPS Part No. Part No. AISI 316 E00840 8.0mm RUBBER FOR ROUND GLASS CLAMPS For Mirror Polished finish option, please see page 51. Ø 30 ADAPTOR FOR ROUND CLAMPS 5 Flat back Glass Thickness For tube Ø A 48.3mm SELF SUPPORTING GLASS CLAMP 60 Part No. Dimension AISI 316 E00997

DA VINCI CLAMP SYSTEM DA VINCI GLASS CLAMP SYSTEM INSTALLATION - Assembly instruction according to the certification Fit the adapter and the back part of the “Da Vinci Clamp” to the tube with an M6 screw If the glass is needed one side only, put an E00840/C fitting in the opposite side Put the rubbers in the appropriate position For a more secure railing, rotate horizontally the supports and insert the glasses between them. Close the unused side of the support using an E00840/C fitting Insert the 2 glasses in the vertically aligned clamp Fix the support positively in place WARNINGS Please retain...

FITTINGS ADJUSTABLE ELBOW

FITTINGS ARTICULATED ELBOW Part No. Application Ø A AISI 304 ARTICULATED ELBOW INTERNAL CONNECTOR

FITTINGS 4-WAY CORNER CONNECTOR For tube Ø A 42.4 x 2.0mm For tube Ø A 42.4 x 2.5mm For tube Ø A 48.3 x 2.0mm CROSS CONNECTOR TUBE ADAPTER WITH SATIN FINISH - 316 AISI 316 Part No. Dimension CROSSBAR HOLDER, INTERMEDIATE B Flat back

WALL FLANGE FLOOR BASE SIDE MOUNTING BASE DISC COUNTERSUNK HOLES AND CHAMFERED PERIMETER AISI 316 E406 Part No. Application External holes

MOUNTINGS FLOOR BASE (OUTDOOR USE) Part No. Application Ø A AISI 316 E40310 ELBOW WITH FLANGE SIDE MOUNTED BASE 316 Part No. Application Ø A AISI 316 E40350 ELBOW WITH FLANGE