Catalogs >
3Form >
Varia Ecoresin

Varia Ecoresin
3Pages

Catalog excerpts

Varia Ecoresin Edge Sealing www.3form.eu

Varia Edge Sealing procedures and guidelines tory Procedures and guidelines for edge sealing Varia Ecoresin A very popular use of 3form Varia Ecoresin is in showers and swimming pool. This brief provides a few points of guidance when incorporating Varia Ecoresin in submerged or wet applications. AFFECTED PRODUCTS Certain Varia Ecoresin designed interlayers (organics, papers and fabrics in particular) can have a tendency to wick moisture over time if edges become wet and are not adequately sealed. These Varia Ecoresin products should not be exposed to water or wet conditions without first...

Open the catalog to page 2

Varia Edge Sealing procedures and guidelines INSTRUCTIONS STEP 1 To prepare for water sealing, sand away all machine or saw marks using 220 grit sandpaper on a dual action orbital sander. Once the machine marks are removed, for an extra polished look sand with 400 and 600 grit sandpaper as well. Be careful not to concentrate the sander in one area for too long, as heat build-up may damage the Varia Ecoresin panel. Apply even pressure so that the edges of the sander do not dig into the panel. (See Figure 1) STEP 2 Remove protective foil 50-100mm from the edge of the panel. Clean edges and...

Open the catalog to page 3