Catalogs >
3Form >
Shapes

Shapes
38Pages

Catalog excerpts

Solution Document Create fluid motion and dynamic presence with 3form Shapes and Twists. Design intimate or expansive installations with formed panels matching edge–to–edge using four separate Continuous Patterns. For a more artfully arranged installation, use any combination of our six Sculptural Forms or infinite combinations of Twists. Shapes, Twists, and their compatible hardware have limitless compositional possibilities. For more information, please visit 3-form.com or call 800.726.0126 April 2019 | MAN-002 SHAPES | REV 014 © 2019 3form, Inc. All rights reserve

Open the catalog to page 1

Shapes™ Solution Document Shapes™ Solution Document 7 Swell 8 Elevate and X Shape 9 Curve 17 Plane 18 Sails 19 Crimp 20 Parasol 21 Twists 22 Twist Details 29 Suspend Panel Connector 30 Point Support 30 Hidden Point Support 31 Versa Spider 31 Versa Bracket 32 Sputnik and Mini Ball Gripper with Safety Nut Table of Contents 1 General Overview 4 Continuous Patterns 4 Flow 5 Valley 6 ZigZag 10 Sculptural Forms 10 Symphony 12 Alta 3S 13 Alta 2M 14 Flag 15 Solitude LS 16 Solitude 2M 23 Hardware Options 23 Bottom Release Gripper 24 Variable Angle Standoff 25 Angled Standoff Adapter 26 Cable Top...

Open the catalog to page 2

Solution Document General Overview Thirty-eight shapes are available. These are presented below as Sculptural Forms, Continuous Pattern Shapes, and Twists. The key differentiation being that Continuous Patterns are “linkable” Shapes that have been modeled and designed to edge match with one another while Sculptural Forms and Twists are unique. Continuous Patterns When Continuous Pattern will be used to match side-by-side, 6 points of attachment must be used to prevent any deflection in the shape. If you want to use a Continuous Pattern Shape but not in a continuous installation (e.g....

Open the catalog to page 3

Solution Document General Overview Sculptural Forms Symphony Vivace Flag For more information, please visit 3-form.com or call 800.726.0126 April 2019 | MAN-002 SHAPES | REV 014 © 2019 3form, Inc. All rights reserved.

Open the catalog to page 4

Shapes™ Solution Document General Overview Hardware Options Additionally, there are several hardware options to choose from: Shapes™ Solution Document Point Support page 30 Surface Bracket (smooth collection) page 26 Bottom Release Gripper page 23 Variable Angle Standoff page 24 Angled Standoff Adapter page 25 Cable Loop page 27 Twist Insert page 28 An A Top Gripper (t & b) (curve collection) page 26 (smooth collection) (smooth collection) page 26 page 26 Top Gripper (curve collection) page 26 Suspend Hardware Suspend Hardware (smooth collection) (curve collection) G Suspend Swivel...

Open the catalog to page 5

Solution Document Continuous Patterns - Flow Front Side Front Side Back Side Back Side General Information Finish available: Sandstone or Patent Holes drilled at 3form by default: No Hardware Available: Wall: Angled Standoff Adapter works in conjunction with Point Support using 6" barrels and wall flange. Variable Angle Standoff Bottom Release Gripper Suspend Swivel Connector (curve collection) Additional Info: Due to variety of installation options no holes is default with Continuous Pattern. When Continuous Pattern Shapes will be used to match side-by-side, 6 points of attachment must be...

Open the catalog to page 6

Solution Document Continuous Patterns - Valley Front Side Valley (up side down) Valley Valley General Information Valley (up side down) Finish available: Sandstone or Patent Holes drilled at 3form by default: No Hardware Available: Ceiling: Variable Angle Standoff Bottom Release Gripper Suspend Swivel Connector (curve collection) Additional Info: Due to variety of installation options no holes is default with Continuous Pattern. When Continuous Pattern Shapes will be used to match side-by-side, 6 points of attachment must be used to prevent any deflection in the Shape. For more information,...

Open the catalog to page 7

Solution Document Continuous Patterns - ZigZag Front Side ZigZag (up side down) General Information Gauge: 3/8" Finish available: Sandstone or Patent ZigZag (up side down) Holes drilled at 3form by default: No Hardware Available: Wall: Point Support Bottom Release Gripper Suspend Hardware (smooth collection) Top Gripper (t & b) (smooth collection) Hidden Point Cable Loop Suspend Hardware (curve collection) Top Gripper (t & b) (curve collection) Versa Spider Additional Info: Due to variety of installation options no holes is default with Continuous Pattern. When Continuous Pattern Shapes...

Open the catalog to page 8

Solution Document Continuous Patterns - Swell Front Side Front Side Back Side Back Side General Information Gauge: 3/8" Finish available: Sandstone or Patent Holes drilled at 3form by default: No Hardware Available: Wall: Point Support Bottom Release Gripper Suspend Hardware (smooth collection) Top Gripper (t & b) (smooth collection) Versa Spider Hidden Point Variable Angle Standoff Suspend Hardware (curve collection) Top Gripper (t & b) (curve collection) Versa Brackets Additional Info: Due to variety of installation options no holes is default with Continuous Pattern. When Continuous...

Open the catalog to page 9

Solution Document Continuous Patterns - Elevate and X Shape Front Side Front Side General Information Gauge: 3/8" Finish available: Sandstone or Patent Holes drilled at 3form by default: No Hardware Available: Wall: Point Support Bottom Release Gripper Suspend Hardware (smooth collection) Top Gripper (t & b) (smooth collection) Versa Spider Hidden Point Variable Angle Standoff Suspend Hardware (curve collection) Top Gripper (t & b) (curve collection) Versa Brackets Additional Info: Due to variety of installation options no holes is default with Continuous Pattern. When Continuous Pattern...

Open the catalog to page 10

Solution Document Continuous Patterns - Curve Front Side Front Side Back Side General Information Edge matching: Radii available: Finish available: Sandstone or Patent Holes drilled at 3form by default: No Hardware Available: Ceiling: Bottom Release Gripper Suspend Hardware (smooth collection) Top Gripper (t & b) (smooth collection) Variable Angle Standoff Suspend Hardware (curve collection) Top Gripper (t & b) (curve collection) Cable Loop Additional Info: Due to variety of installation options no holes is default with Continuous Pattern. When Continuous Pattern Shapes will be used to...

Open the catalog to page 11