Light up your Space

3F LEM Ready to light up your future. Efficiently. Air passage 3F LEM has been designed to have the best possible air passage in all installation conditions, including ceiling mounted. Aerodynamic analysis has allowed dust deposits on the heat dissipators to be avoided. Wiring compartment separate from heat dissipators Thanks to this design, the power supplies are not affected by the heat emitted by the modules. This solution also allows wiring compartments of different lengths to be created. Upgradability Lenses, sources and power supplies can be replaced at the end of their life cycle, or upgraded...

Industrial application example Data refers to a typical industrial shed Average lighting level: 300 lx Number of luminaires installed Source lifetime (hours) Added to this are the savings from the drastic reduction in maintenance costs! Photometric distributions WIDE Rectangular ground projection As there is no photometric overlap, the energy used and number of luminaires is optimised. DL Uniformity To obtain uniform lighting, the installation pitch is equal to: DT = 1.5 x hu DL = 1.4 x hu hu = Effective installation height Elliptical ground projection Recommended for warehouses with large installation...

Available versions Sensor High Temperatures Colour temperature - Versions for the food industry - Emergency versions - Versions with luminous flux of over 30,000 lumen (using more than 4 modules) - Colour temperature 3000K and 6500K - Sources with colour rendering index (CRI) > 90 Versions Ambient temperature in operation Power supply Light and presence detector For 3F Filippi, accuracy and propriety towards its customers is a core value; as such, we guarantee: - Output and photometric data are real and measurable, supported by the Assil Quality declaration - High quality products and internal...