Speedglas™ SL

Product catalog summary

Introduction
This document provides guidelines for the maintenance and care of the 3M™ Speedglas™ SL Welding Helmet to ensure its longevity and effectiveness in providing protection.

Before Use

Inspect inner and outer protection plates and filter glass for cracks, pits, or scratches and replace if necessary.
Check the low battery indicator and replace the battery if needed.
Inspect the headband and helmet for damage and replace if necessary.
Ensure the sweatband is in place and replace if needed.
Verify that the sensors on the welding filter are clean and uncovered.

After Use

Clean the helmet with a cloth dampened with a mild detergent solution and lukewarm water.
Store the helmet in a dry, clean area away from direct sunlight, high temperatures, and solvents.

Ordering Consumables and Parts
Contact a 3M Approved Distributor to request quotes or place orders for consumables, repair parts, and accessories.

Further Information
For additional guidance on care and maintenance, contact the 3M Helpline or your local 3M representative.

Product Specifications

Speedglas SL welding helmet, variable shade 8 – 12: Part No 70 11 20
Sweatband options: Leather (16 80 00) and Fleecy cotton (16 80 10)
Neck protection and hood: Black/grey (16 90 01, 16 91 00)
Magnifying lenses: Available in 1.0, 1.5, 2.0, 2.5 diopters
Battery package of 2: Part No 42 20 00
Inner and outer protection plates: Various options available

Contact Information
3M Health & Safety Helpline is available Monday to Friday, 9 to 5, at 0870 60 800 60 (UK) and 1 800 320 500 (Ireland).

Catalog excerpts

To optimise the effective lifetime of your welding equipment and avoid the additional cost of replacement, regular maintenance is important. Before Use • Inspect inner and outer protection plates and filter glass. Replace if cracked, pitted or scratched • Ensure low battery indicator is not flashing • Inspect headband. Replace if damaged • Inspect helmet for cracks. Replace if necessary • Verify the sweatband is in place. Replace if necessary • Replace any accessories used as necessary • Check that the sensors on the welding filter are clean and uncovered After Use • Clean with cloth dampened with a mild solution of detergent and luke warm water • Store in a dry, clean area / locker away from direct sunlight, high temperatures and solvents Ordering Consumables, Repair Parts and Accessories To request a quote or place an order for these items, please contact your 3M Approved Distributor. Further Information and Advice If you require additional guidance on the Care and Maintenance of your 3M Welding Equipment, please contact the Helpline or your local 3M representative. 3M Health & Safety Helpline Monday - Friday 9 to 5 3M™ Speedglas™ SL Welding Helmet 3M Ireland Limited The Iveagh Building The Park Carrickmines Dublin 18 Tel: 1 800 320 500 17808 3M and Speedglas are trademarks of 3M Company Please recycle. Printed in UK. © 3M 2014. All rights reserved. r REPLACE ALL DAMAGED PARTS IMMEDIATELY TO ENSURE CORRECT LEVELS OF PROTECTION For more information on all our products, call 3M Personal Safety Division on 0870 60 800 60 (UK) and 1800 320 500 (Ireland) or visit www.3M.co.uk/safety

Open the catalog to page 1

Speedglas™ SL

Speedglas™ SL

Catalog excerpts

All 3 M France catalogs and technical brochures