3M™ Overspectacles OX Series Technical datasheet Product description The 3M™ Overspectacles OX Series have been designed to be worn over prescription spectacles. Each of the 3 variants offers unique distinctive features. Ŕ Designed to be worn over prescription eyewear The OX1000 basic model features fixed temples and an uncoated lens. Ŕ Optical Class 1 to allow prolonged comfortable wear Ŕ Offers excellent protection against UV radiation The OX2000 comes with adjustable lock-in temples (5 positions) and rotating tips (excellent grip in all positions). The OX3000 is intended for use in environments where hearing protection is also required. The low-profile adjustable temples have been designed to be worn in combination with 3M earmuffs. The non-slip pliable temple tips provide a comfortable fit. Product range Product ID Lens colour Frame colour 3M™ OX1000 Overspectacles with clear PC lens 3M OX2000 Overspectacles with clear PC lens 3M™ OX3000 Overspectacles with clear PC lens Typical applications These products can be used in a wide range of applications including: These products are type examined by BSI Group, Notified Body number 2797. Ŕ Construction Ŕ Engineering Ŕ General assembly Ŕ Woodworking These products are CE marked to the requirements of European Regulation (EU) 2016/425. The applicable legislation can be determined by reviewing the Certificate and Declaration of Conformity at www.3M.com/Eye/certs Ŕ Light duty maintenance and repair Intended use These products are intended for protection against high speed particles at low energy (F) at extreme temperature conditions, -5°C and +55°C, (T) in accordance with EN 166:2001. These products also help protect against UV radiation in accordance with EN 170:2002. Materials listing Description Temple arms Polycarbonate Polycarbonate / Thermoplastic / Thermoplastic rubber (TPR rubber (TPR) and TPE) Temple tips Ŕ Never modify or alter this product Ŕ Do not use this product against hazards other than those specified in this document The products have demonstrated compliance with the requirements of EN 166:2001 and associated standards and bear the following marks: Ŕ In accordance with EN 166:2001 safety spectacles cannot be tested and approved for use against liquid droplets. Where liquid protection is specified a suitable product should be considered, for example safety goggles Lens marking Frame marking

Explanation of marking Marking UV protection. This product conforms to the requirements of the standard, providing UV protection for the complete specified range (210nm – 365nm). Products marked C provide good colour recognition. Optical class Impact protection against high speed particle at low energy (45m/s) Tested for impact protection at extreme temperature conditions -5°C and +55°C IMPORTANT NOTICE The use of the 3M product described within this document assumes that the user has previous experience of this type of product and that it will be used by a competent professional. Before any...