カタログ >
TECHNOKOLLA >
kalox-pool

kalox-pool
1 / 5ページ

カタログの抜粋

KALOX-POOL Waterproof cement-based mortar for protecting and finishing concrete.

MAIN FEATURES Two-component product Highly protective High resistance to chlorinated water Waterproof Pigmentable for coloured finishes APPEARANCE Comp. A: white liquid Comp. B: white powder Mix: white STORAGE 12 months from date of manufacture if stored correctly in cool, dry place in original sealed, undamaged package. FIELDS OF USE -- Protection of concrete surfaces, in accordance with standard EN 1504-9, Actions: 1: protection against penetration (cladding); 2: humidity control (cladding); 8: increased resistivity (cladding). -- Visually exposed pigmentable finishing treatment for...

カタログの2ページ目を開く

RECOMMENDED ACCESSORIES HOW TO PREPARE THE SUBSTRATE The substrate must be structurally sound and free from all traces of contaminants, crumbling material, parts that are about to detach, efflorescence, oil, grease, etc. It must be sandblasted or cleaned by high-pressure water jet cleaner. Avoid cleaning methods that create impact or vibration. If the substrate is made of concrete, its “pull off” resistance must be > 1.5 N/mm². Concrete that is poorly resistant, damaged or with parts that are beginning to detach must be repaired with mortar such as GAP or GAP-R. If necessary, use mortar to...

カタログの3ページ目を開く

WARNINGS AND RECOMMENDATIONS -- protect from rain until at least 6 hours from application. -- avoid application and protect freshly applied material from: direct sunlight and/or strong wind, rain. -- subgrade must be statically sound and fitted with regular expansion joints to absorb all the expected structural displacements. -- use only products specifically designed for swimming pools, and follow the dosage recommended by the manufacturer. -- if KALOX-POOL is used on rigid substrates, such as the protective coating on reinforced cement, it can be applied without fiberglass net between the...

カタログの4ページ目を開く

TECHNICAL DATA Appearance Maximum diameter of aggregate Mixing ratio COMPONENT A COMPONENT B White liquid White powder Carbon dioxide permeability Water vapour permeability Liquid water permeability and capillary absorption Freezing-thawing cycles (immersion in deicing salts) Bond strength Reaction to fire APPLICATION SPECIFICATIONS VALUE Trowel or spray gun approx. 40 min 2 mm 2 kg/m2 per mm of thickness +8°C min. / +30°C max. 5-7 days Application Pot life Thickness per coat Consumption Temperature during application Time interval before pool can be filled The advice about technical...

カタログの5ページ目を開く

kalox-pool 1 / 5ページ

カタログの抜粋

TECHNOKOLLAのすべてのカタログと技術パンフレット

kalox-pool
1 / 5ページ