FLARE
1 / 13ページ

カタログの抜粋

07/08 - 2 Construction subject to change. Stand: 22.02.2018 No return possible!

Lint separator FLARE Description To separate textile fibre from the return air of clean rooms, in particular operating theatres and their adjoining rooms, a lint separator is used. The separation takes place directly at the extraction point. As a component of the ventilation installation, the separator is mounted in the exhaust air outlet flush with the operating theatre wall or in overflow openings. This protects the air-conditioning ducts and the downstream filters by separating fibre particles in the operating theatre area and allows an economic and smooth operation of the ventilation...

カタログの3ページ目を開く

Lint separator FLARE Models and dimensions Dimensions FLARE-...-SM-... with AK-36-...-S1 Detail X Z as-delivered condition with fitted fixing lug Z with bent fixing lug Available sizes Spigot arrangement for plenum box L - Spigot from above (-S0) - Lateral spigot (-S1, standard) - Spigot front side (-S4) Dimensions and prices for spigot from above (-S0) and spigot front side (-S4) upon request. 07/08 - 4 Construction subject to change. Stand: 22.02.2018 No return possible!

カタログの4ページ目を開く

Mounting frames are only delivered with 4 wall anchors on special request (at an extra charge) (-ER2). Construction subject to change.

カタログの5ページ目を開く

Lint separator FLARE Fastening methods Concealed mounting FLARE-...-VM - with 2x VM11 (1 each on H side) 225x125 / 325x125 / 425x125 / 525x125 / 625x125 / 225x225 / 325x225 / 425x225 / 525x225 / 625x225 SM mounting FLARE-...-SM - with 4 sash locks 225x125 / 225x225 / 325x325 1.) with 4 or 6 indentations for on-site slotted shallow-raised countersunk-head tapping screws DIN ISO 7051 pitch 3.9 For number and position of sash locks, see SM mounting. 07/08 - 6 Construction subject to change. Stand: 22.02.2018 No return possible!

カタログの6ページ目を開く

Lint separator FLARE Technical data Pressure loss and noise level FLARE-...-225-125-... with AK-36-... 07/08 - 7 Construction subject to change. Stand: 22.02.2018 No return possible!

カタログの7ページ目を開く

Lint separator FLARE FLARE-...-325-225-... with AK-36-... 07/08 - 8 Construction subject to change. Stand: 22.02.2018 No return possible!

カタログの8ページ目を開く

Lint separator FLARE FLARE-...-425-325-... with AK-36-... 07/08 - 9 Construction subject to change. Stand: 22.02.2018 No return possible!

カタログの9ページ目を開く

Return air volume Return air volume Pressure loss Density A-weighted sound power level Length Width approximately Construction subject to change.

カタログの10ページ目を開く

ICHAK#Lint separator FLARE Order code FLARE 01 Sample FLARE-PS-625-125-A-9010-SM-ER0 Lint separator type FLARE I perforated sheet steel I grille length 625mm I grille height 125mm I return air I frame painted to RAL 9010 (white) I screw mounting I without mounting frame Order details 01 - Type FLARE = Rectangular lint separator 02 - Model PS = Perforated sheet steel with back-fitted wire fabric made of stainless steel 0.8 mm x 0.5 mm (standard) V2 = Stainless steel (V2A), perforated, with back-fitted wire fabric made of stainless steel 0.8 mm x 0.5 mm 03 - Length 225 = Grille length 225 mm...

カタログの11ページ目を開く

Lint separator FLARE Order code AK 01 Plenum box, rectangular design I suitable for lint separator FLARE I length 425 mm I height 225 mm I standard length I with screw mounting I sheet steel painted to RAL 9010 (white) I with damper | with rubber lip seal | without box insulation | standard height of box | standard width of box I standard spigot diameter | lateral spigot Order details 01 - Plenum box AK = Plenum box, rectangular design 02 - Air diffuser (must be ordered separately) 36 = suitable for FLARE-... 03 - Length 225 = Grille length 225 mm 04 - Height 125 = Grille height 125 mm 225...

カタログの12ページ目を開く

Lint separator FLARE Specification texts Lint separator for filtering textile fibre charged return air from clean rooms, consisting of a rectangular frame and a fitted, replaceable lint separator insert made of sheet steel painted to RAL 9010 (white) (-PS) or stainless steel 1.4301 (V2A) (-V2) sand silver painted (-SAND), with back-fitted wire fabric made of stainless steel 1.4301 (V2A), mesh width 0.8 mm x 0.5 mm. Fastening by means of screw mounting (-SM) or concealed mounting (-VM). For cleaning and disinfection purposes, easy to disassemble by turning the sash lock. Product: SCHAKO type...

カタログの13ページ目を開く