FLAQ
1 / 11ページ

カタログの抜粋

07/08 - 2 Construction subject to change. Version: 23.09.2019 No return possible!

Lint separator FLAQ Description To separate textile fibre from the return air of clean rooms, in particular operating theatres and their adjoining rooms, a lint separator is used. The separation takes place directly at the extraction point. As a component of the ventilation installation, the separator is mounted in the exhaust air outlet flush with the operating theatre wall or in overflow openings. This protects the air-conditioning ducts and the downstream filters by separating fibre particles in the operating theatre area and allows an economic and smooth operation of the ventilation and...

カタログの3ページ目を開く

Lint separator FLAQ Models and dimensions Dimensions FLAQ-...-VM-... with SK-Q-19-A-...-S1 Available sizes - SO = spigot from above - S1 = 1 lateral spigot on the box (standard) - S2 = 2 spigots offset by 90° -S3 = 2 spigots offset by 180° - S5 = 2 spigots arranged next to each other Dimensions for spigot position -S0 / -S2 / -S3 / -S5 on request. Minimum height with spigot position -S1 / -S2 / -S3 / -S5 = spigot diameter 0D + 102 mm, but at least 200 mm. See page 5 for detail X. See page 6 for dimensions of SM mounting. Construction subject to change.

カタログの4ページ目を開く

Rubber lip seal (-GD1), for SK-Q-... Detail X Volumetric flow meter (-VME1), for SK-Q-... (not for use with a damper) Mounting frame design: - without wall anchor (-ER1) (standard) - with wall anchor (-ER2) (only at an extra charge) Mounting frames are only delivered with 4 wall anchors on special request. ROB version (-ROB1), for SK-Q-... (only possible for SK-Q-19-... plenum box) Removable damper and volumetric flow meter Thermal insulation, for SK-Q-... internal (-Ii) external (-Ia) Construction subject to change.

カタログの5ページ目を開く

Lint separator FLAQ NW Fastening methods SM mounting FLAQ-...-310-SM-... to FLAQ-...-500-SM-... with 4 sash locks Section A-A (Shown with plenum box SK-Q-...) For number and position of sash locks, see SM mounting. FLAQ-...-310-... : with 4 indentations for on-site slotted shallow-raised countersunk-head tapping screws DIN ISO 7051 pitch 3.9 FLAQ-...-400-... to FLAQ-...-625-... : with 4 indentations for on-site slotted shallow-raised countersunk-head tapping screws DIN ISO 7051 pitch 4.8 FLAQ-...-800-... : with 8 indentations for on-site slotted shallow-raised countersunk-head tapping...

カタログの6ページ目を開く

Lint separator FLAQ Technical data Pressure loss and noise level FLAQ-...-310-... with SK-Q-19-A-... 150- Construction subject to change.

カタログの7ページ目を開く

Return air volume Return air volume Pressure loss Density A-weighted sound power level Nominal width approximately Construction subject to change.

カタログの8ページ目を開く

Lint separator FLAQ Order code FLAQ 01 Sample FLAQ-PS-500-A-9010-SM-ER0 Lint separator type FLAQ I perforated sheet steel I NW 500 I return air I frame painted to RAL 9010 (white) I screw mounting I without mounting frame Order details 01 - Type FLAQ = Square lint separator 02 - Model PS = Perforated sheet steel with back-fitted wire fabric made of stainless steel 0.8 mm x 0.5 mm (standard) V2 = Stainless steel (V2A), perforated, with back-fitted wire fabric made of stainless steel 0.8 mm x 0.5 mm 03 - Nominal size 310 = NW310 05 - Frame colour 9010 = RAL colour white (standard for -PS...

カタログの9ページ目を開く

Lint separator FLAQ Order code SK 01 Sample SK-Q-19-A-500-SM-SB-DK1-GD1-VME1-R0B0-I0-KHS-SDS-S1 Plenum box, square design I for square air diffusers I air diffuser FLAQ I return air I NW500 I with screw mounting I sheet steel painted to RAL 9010 (white) I with damper I with rubber lip seal I with volumetric flow meter I without ROB model I without box insulation I standard height of plenum box I standard spigot diameter I 1 lateral spigot Order details 01 - Plenum box SK = Plenum box, square design 02 - Model Q = for square air diffusers 03 - Air diffuser (must be ordered separately) 19 =...

カタログの10ページ目を開く

Specification texts Lint separator for filtering textile fibre charged return air from clean rooms, consisting of a square frame and a fitted, replaceable lint separator insert made of sheet steel painted to RAL 9010 (white) (-PS-9010), sheet steel painted to RAL colour which can be freely selected (-PS-xxxx) or stainless steel 1.4301 (V2A) sand silver painted (-V2-SAND), with back-fitted wire fabric made of stainless steel 1.4301 (V2A), mesh width 0.8 mm x 0.5 mm. For cleaning and disinfection purposes, easy to disassemble by turning the sash lock. Product: SCHAKO type FLAQ-... Fastening:...

カタログの11ページ目を開く