DSX
1 / 25ページ

カタログの抜粋

04/03 - 2 Construction subject to change. Version: 06.09.2018 No return possible!

Ceiling Slot Diffuser Model Description The small ceiling slot diffuser type DSX-S is suitable for installation in closed ceiling systems, in rooms of heights 2.6 to 4 m. In panelled ceilings, the use of the black (RAL 9005) air guide element allows an approximately invisible installation of the slot diffuser. The models DSX-P, DSX-PA and DSX-PB with support profile are suitable for installation in ceiling panels. Adjustments of the blades enable the diffuser to be used for cooling and heating applications. The high induction ensures fast reduction of the air outflow velocity and of the...

カタログの3ページ目を開く

Ceiling Slot Diffuser ModelAccessories Fastening Plenum box (-ASK) permanent connection - Galvanised sheet steel, with lateral connection spigot and fix- - Standard for models DSX-S, DSX-P, DSX-PA and DSX-PB ing lugs. Clamp fastening Damper (-DK) - Installation of the DSX-P and DSX-PB without plenum box - Damper fastening made of plastic in pressure ceilings. - Damper made of galvanised perforated sheet - supplied loose as standard Corner angle 90° (-EW) Concealed mounting (-VM) - Extruded aluminium profile (in same colour as DSX) - Standard for band design with plenum box (-ASK) M4...

カタログの4ページ目を開く

Ceiling Slot Diffuser Model Models and dimensions Air throw pattern Air guide element position (throw direction): vertical (-L I) one-way horizontal throw to the left (-L II L) one-way horizontal throw to the right (-L II R) alternate horizontal throw (-L III, standard) all adjacent blades will be set in one direction when ordering multi slot models Return air 04/03 - 5 Construction subject to change. Version: 06.09.2018 No return possible!

カタログの5ページ目を開く

Ceiling Slot Diffuser Model Dimensions DSX-S, without support profile For installation in closed ceiling systems or for invisible installation in the joint of panelled ceilings. DSX-P: with support profile For installation in ceiling panels, suitable for installation in closed ceiling systems. DSX-PA, with support profile For installation in closed ceiling systems anodised model painted model anodised model painted model anodised model painted model anod. model paint. model DSX-PB, with support profile For installation in ceiling panels, suitable for installation in closed ceiling systems....

カタログの6ページ目を開く

Ceiling Slot Diffuser Model Dimensions of accessories Plenum box (-ASK) for DSX-S / DSX-P / DSX-PA / DSX-PB View A with 1 spigot with 2 connection pieces Detail X / diffuser mounting Standard: at an extra charge: on site = Height of plenum box = Total height Available sizes To facilitate ceiling mounting, the plenum boxes can be provided with an M4 riveting nut. This is to be carried out on site if diffusers are ordered without plenum boxes. Insulation for plenum box internal (-Ii) Rubber lip seal (-GD) Detail Y 04/03 - 7 Construction subject to change.

カタログの7ページ目を開く

When the ceiling slot diffuser type DSX is designed as a band > 2000 mm, the total length BL is assembled from standard lengths L = 1500 mm. The difference pieces <1500 mm to >400 mm can be fitted with a plenum box. The difference pieces <400 mm are supplied as dummy pieces without plenum box. A different band division is possible after consultation and when required by the customer. Individual sections are connected (for mounting on site) by using double blades. Construction subject to change.

カタログの8ページ目を開く

Ceiling Slot Diffuser Model Double blade Detail of connection element 1 Connection element 1 not possible when diffuser is suspended with riveting nut and band design is used. Mounting handle for double blade Double blade active - passive Detail of connection element 3 Fastening screw: Torx screw M4 DIN 7991-TX passive - passive Fastening screw: Torx screw M4 DIN 7991-TX 04/03 - 9 Construction subject to change. Version: 06.09.2018 No return possible!

カタログの9ページ目を開く

Ceiling Slot Diffuser Model Dummy piece (-BS) DSX-S-1 W m Detail W Mounting bracket (pair) (-BW) for operation with overflow air DSX-S-1 V Detail V mu Arrangement of the mounting holes in the dummy plate DSX-...-1 (1-slot) with 2 mounting holes Arrangement of the mounting holes DSX-...-1 (1-slot) with 2 mounting holes DSX-...-2 to DSX-...-4 (2- to 4-slot) with 4 mounting holes DSX-...-2 to DSX-...-4 (2- to 4-slot) with 4 mounting holes In the dummy design, no operation with overflow air is possible since the slot diffuser is completely closed at the back. Construction subject to change.

カタログの10ページ目を開く

Ceiling Slot Diffuser Model Band design for operation with overflow air or dummy plates Additional connecting fishplates In the band design for operation with overflow air or dummy plates, two additional fishplates are supplied loose, thus only requiring two threaded bars on-site for suspension. 04/03 - 11 Construction subject to change. Version: 06.09.2018 No return possible!

カタログの11ページ目を開く

Ceiling Slot Diffuser Model End piece (-ES) To give the impression of a surrounding frame, side end pieces can be installed (for an additional charge). These end pieces are supplied loose as standard. If there are order details regarding fitting, mounting will take place at the factory. for DSX-S (-ES1) x End piece on both sides (-ES2 / -ES3) When the end pieces are mounted at the factory, it is essential to specify in the order whether the end piece is to be attached to both sides, or the left- or right-hand side. 04/03 - 12 Construction subject to change. Version: 06.09.2018 No return...

カタログの12ページ目を開く

Ceiling Slot Diffuser Model Corner angle (-EW) (1- to 4-slot) Corner angles can only be produced as dummy pieces, i.e., without a plenum box. The corner angle has a 90° angle and is 250 mm long. Other angles are available on request The dummy plate is painted in the colour RAL 9005 (black) or RAL 9010 (white). The corner brackets are supplied loose as standard. DSX-P DSX-PB Fishplate firmly screwed for the on-site connection with slot diffuser + double blade loose 04/03 - 13 Construction subject to change. Version: 06.09.2018 No return possible!

カタログの13ページ目を開く

Ceiling Slot Diffuser Model Fastening methods Clamp fastening for DSX-P and DSX-PB in mounting position (not possible for model DSX-S!) Clamp fastening is used for room side installation in finished pressure ceilings. Mounting instructions As standard, the clamp straps are delivered loose. Take out the air guide elements at the ends. Fasten the clamp strap with the screw such that it is positioned in the direction of the slot diffuser (see installation position). Then introduce the slot diffuser into the pressure ceiling. Then rotate the clamp strap by about 90° by rotating the screw and...

カタログの14ページ目を開く