カタログ >
SCHAKO KG >
DISA-300

DISA-300
1 / 51ページ

カタログの抜粋

11/05 - 2 Construction subject to change. Version: 20.10.2015 No return possible!

Ceiling induction diffuser DISA-300 Description Ceiling induction diffusers combine the flow characteristics of air diffusers with the energetic advantages of load discharge via water-based heat exchangers, allowing them to remove high thermal loads from the room while keeping the hygienically required air exchange low. The construction of the ceiling induction diffuser DISA-300 is very maintenance- and mounting-friendly and is also suitable for low false ceiling heights, due to its small height. Its 4 different nozzle configurations A, B, C, D and lengths of up to 3.0 metres allow the...

カタログの3ページ目を開く

Ceiling induction diffuser DISA-300 Model DISA-300-1-... DISA-300-2-... DISA-300-H DISA-300-HT DISA-300-BO DISA-...-LE DISA-...-LB DISA-...-SR DISA-...-SQ DISA-...-RE DISA-...-OB DISA-...-PA DISA-...-A DISA-...-B DISA-...-C DISA-...-D Description of the equipment Construction Housing - Galvanised steel sheet with 1 or 2 primary air connecting pieces 098, 0123 (standard) and 0148 mm. Return air connecting piece as an option. - Connecting piece position for primary and return air: - Horizontal (-H) - Vertical (-V) - Arrangement of the primary air connecting pieces: - 1 horizontal connecting...

カタログの4ページ目を開く

Ceiling induction diffuser DISA-300 Models and dimensions Dimensions and weights DISA-300-1 LG* (mm) = total length of the device with and without end pieces wc,h p5rforated sheet grille (-SR/-SQ/- 0D (mm) = diameter of the connection pipes (98, 123 and 148) LG* (mm) = total length of the device with and without end pieces B (mm) = 298 / 600 (-FM) 0D (mm) = diameter of the connection pipes (98, 123 and 148) with perforated sheet grille (-SR/-SQ/-RE/-OB) with louvre grid (-PA) Weights DISA-300 NL (1) Standard unit: housing + slot + grille and heat exchanger (empty) Construction subject to...

カタログの5ページ目を開く

Ceiling induction diffuser DISA-300 Arrangement of the connecting pieces (-AS) and water connection (-WS) Number/position of the connecting pieces - with horizontal connection (-H) - with 1 central connecting piece (-AS1) or (-AS4) - with 2 connecting pieces (-AS2/AS3) or (-AS5/AS6) - with vertical connection (-V) - with 1 central connecting piece (-AS7) - with 2 connecting pieces (-AS8/AS9) Number/position of the water connections - with 2 water connections (2-pipe system, standard) - with 4 water connections (4-pipe system) - sideways top left (-WS1) - sideways top right (-WS2) Vertical...

カタログの6ページ目を開く

Ceiling induction diffuser DISA-300 Return air connecting piece arrangement(-A) Number/position of the return air connecting pieces - with horizontal connection (-H) - Right front (R1) or right back (R2) - Left front (L1) or left back (L2) - with vertical connection (-V) - Right (R) - Left (L) Heating Cooling Housing position Heating Cooling DISA-300-2-...- Perforated sheet grille- Design DISA-...-SR DISA-...-SQ DISA-...-RE 11/05 - 7 Construction subject to change. Version: 20.10.2015 No return possible!

カタログの7ページ目を開く

Ceiling induction diffuser DISA-300 Fixing lugs - Individually adjustable air deflection blades (-LE) - Blockwise adjustable air deflection blades (-LB) With blockwise adjustable blades, 5 blades can be adjusted simultaneously. A The adjusting angle of the air deflection blades /' \ must not be more than ± 45°, in order to guarantee its function. A At an adjusting angle of the air deflection blades outside the straight air throw of up to 45°, the cooling capacity of the heat exchanger is reduced by up to 5%, and the horizontal throw is reduced. Construction subject to change.

カタログの8ページ目を開く

Ceiling induction diffuser DISA-300 Accessories Flexible connection hoses (-FA) Flexible armoured hose with stainless steel braid, oxygen diffusion layer to DIN 4726, one-sided by means of plug-in fitting 90° with stainless steel claw, support ring, 2 sealing rings (operating pressure 20 bar, test pressure 60 bar, temperature -40° to +80°) and lock washer, other side 1/2" spigot nut with flat seal. L= 500, 800 and 1200 mm. Other lengths on request. External thread flat-sealing Water connections 1/2" external thread flat-sealing Rubber lip seal (-GD) at the connection pipe for better...

カタログの9ページ目を開く

Ceiling induction diffuser DISA-300 Figures DISA-300 with end piece (-2E, standard) DISA-300-1-H DISA-300 band design without end pieces mounted in-between System solution SCHAKO offers system solutions that can be integrated perfectly into the room architecture. Example of a system solution with lighting and sprinkler DISA-300 with foldable grille DISA-300-1-H 11/05 - 10 Construction subject to change. Version: 20.10.2015 No return possible!

カタログの10ページ目を開く