UNICA
1 / 28ページ

The Unica full extension concealed runner combines Smove decelerated closing action with both traditional opening and Push self-opening for handle-less furniture. The fully integrated operating system is completely mechanical and therefore does not require a power source. The runner is available in two versions: - fixed to the drawer by locating pin (see page 20) - fixed to the drawer by clip (see page 22)

Handle-less opening Push the frontal to open the drawer. The drawer opens approximately 5 - 10 cm. Open drawer. Closing with decelerating effect. Open the drawer to access the inner space. Opening with handle Pull the handle to open the drawer. Open drawer. Closing with decelerating effect.

- Fixing Fixing full-extension runner on cabinet side. The oval slot allows the easy alignment of drawer frontals particularly in multi drawer and Push applications. Drilling positions for runner on cabinet side. Full-extension 9 99 For the function Push is required an A value = 2,5 mm. This value is obtained by placing the runner at 37 mm from the edge of the cabinet. Detail of the rear additional fixing hole

Drawer setting Drawer setting: abbreviations Chest of drawers SP = Thickness of the drawer LN = Nominal runner length PM = Depth of the cabinet X = Internal width of the cabinet Drawer dimensions LC = Runner length - 10 mm X - 41 = Internal width of the drawer LC The drawer length is 10 mm shorter than the runner length The internal width of the drawer is 41 mm less than the internal width of the cabinet

- Pin fix clip - Drawer drilling Drawer drilling Drawer with frontal - three-sided (view from below) Template for drawer drilling - see page 186 A Drawer drilling Internal drawer - four-sided (view from below) Template for drawer drilling - see page 26 Rear hook

Pin-fix clip - technical information Fixing of the drawer security pin Available on all runner versions This operation is tool free The device locks the drawer onto the runners

- pin-fix clip - adjustments Height adjustment + 3 mm Initial position of the lever for the height adjustment. Turn the lever towards the front of the drawer to achieve the height adjustment. This operation is tool free.

Pin-fix clip Rotate the black wheel towards the front of the drawer to increase the gap between the front and the side. This operation is tool free. Rotate the black wheel towards the back of the drawer to reduce the gap between the front and the side. This operation is tool free.

- Clip version - Drawer drilling P Drawer drilling Drawer with frontal - three-sided (view from below) Drawer drilling Internal drawer - four-sided (view from below) Real hook

1 way adjustable clip - Technical information - adjustment Clip fixing Drawer adjustment Drawer height adjustment (+ 2,5 mm) using the lever indicated

- With 3 way adjustable clip The 3 way adjustment allows to: - align the drawers between them; - align the drawers with the cabinet. Features and benefits of the clip: - for all versions of full-extension runners - tool free 3 way adjustment - patented removal system of the drawer, from both the front and the sides of the drawer - clip manufactured in Carbon Fibre rich material for light weight, strength and rigidity Clip assembly Position the left and the right clip at the front of the drawer. Fix with the screws on the bottom or on the front of the drawer as indicated in the images below.

3 way adjustable clip - Removal The drawer can be removed operating from both the front and the sides. Removal from the front: position the hands under the front of the drawer and operate on the orange levers, as indicated in the drawing, sliding the drawer forward. Removal from the side: position the hands under both sides of the drawer and operate on the orange levers, as indicated in the drawing, sliding the drawer forward.

- With 3 way adjustable clip Height adjustment + 2.5 mm Initial position of the lever for the height adjustment Push the lever towards the outside of the drawer to achieve the height adjustment. This operation is tool free.

Rotate the white wheel towards the front of the drawer to adjust left. The clip shows the position 0. This operation is tool free. Rotate the white wheel towards the back of the drawer to adjust right. The clip shows the position 0. This operation is tool free. For sideways adjustment, it is recommanded that the adjusters on the clips are operated in the same direction, in order to maintain the correct alignement and movement of the runners.

- With 3 way adjustable clip Depth adjustment + 2 mm - 2 mm Rotate the black wheel towards the inside of the drawer to reduce the gap between the front and the side. The clip shows the position 0. This operation is tool free. Rotate the black wheel towards the ouside of the drawer to increase the gap between the front and the side. The clip shows the position 0. This operation is tool free.

Technical information Drawer length = extension Industrial packing = 20 pairs Clip version Pallet: - length from 300 to 400 mm = 300 pairs - length from 450 to 500 mm = 280 pairs Pin version Pallet: - length from 300 to 400 mm = 300 pairs - length from 450 to 500 mm = 280 pairs Part number composition - runners BASIC PART NUMBER ARTICLE VERSIONS: 80 = Unica FIXING ON CABINET SIDE: 0 = to be screw fixed

6528 - concealed runner Full-extension runner system fixed to the drawer by locating pin. The Push self-opening system for handle-less drawers is fully integrated into the runner. A slight pressure on the drawer frontal is sufficient for the drawer to self-open. The Smove decelerated closing action is also fully integrated into the runner. Product features - Safety system that secures the drawer to the runner. - Drawer height adjustment +3 mm and depth adjustment ±2 mm. - The drawer is maintained parallel with the cabinet side during opening. - Drawer fixing without screws. - Finish: bright...

BASIC PART NUMBER To be screw fixed Screw TSP 0 3,5 mm The flexibility of the system enables the locating pin to be engaged simply by placing the drawer onto the runners and closing it. Detail of the pin-fix clip premounted on the runner, with: - Tool free height and depth adjustment; - Safety device to prevent the drawers from turning over; - Locating pin. Detail of the integrated systems into the runner: - Push, which allows the opening of handle-less drawers. - Smove, which allows the decelerated closing of the drawers.