Elegant ECM Ceiling Air Conditioner
1 / 9ページ

Elegant ECM Ceiling Rir Conditioner Elegaiit eeir air conditioners allow to heat and cool very economically small and medium areas, like shops, show rooms, workshops, supermarkets. The range is made up of 12 models: RE-ECM version, for heating only, is made up of 8 models, and PE-ECM version, for heating and cooling, is made up of 4 models. All models are for ceiling installation and for hot/chilled water supply.

The Elegant ECM series uses an innovative brushless synchronous permanent magnet electric motor controlled by an inverter card that is directly installed on the unit. The intake of the air is from the bottom side of the unit and the air supply is from the 4 lateral grids which have individually controllable louvres for the best distribution of the air. The condensate drain is made through an electronically controlled micro-pump, supplied on every standard PE-ECM model. Different remote controls of the air flow and of the room temperature are available and it is possible to control up to 10...

Construction features Casing made of steel on both top and bottom sections and it is then finished with an epoxy-polyester powder coating dried at 180°, in white RAL 9016. The lower casing is also the condensate collection tray. The components are assembled with screws and so it is possible to quickly dismantle it for inspection when needed. Outlet grids The discharge of the air is obtained through 4 grids on the 4 lateral sides. They are comprised by a frame in which the louvres are individually adjustable. It is very easy to take off these grids, allowing for easy maintenance of the coil...

With 1 ROW COIL (only heating)

ELEGANT Technical Specifications The following standard rating conditions are used: (*) = Measurement performed at 3 meter from the source, room volume of 500m3, reverberation period of 2 s, directional factor Q=2 (hemisphere sound emission) (**) = Measurement performed at 3 meter from the source, room volume of 1500m3, reverberation period of 2 s, directional factor Q=2 (hemisphere sound emission)

ELEGANT Technical Specifications The following standard rating conditions are used: Entering air temperature: +27°C d.b. R.H. 50% Entering air temperature: +20°C Water temperature: + 7°C E.W.T. +12°C L.W.T. Water temperature: +70°C E.W.T. +60°C L.W.T.

3-way valve kit Comprised of: - one 3-way valve 3/4" kVs 4,7 - one actuator - pipe connections Hanging brackets Comprised of 4 eye bolts and screws. Washer for screw M8 Screw M8 x 16 Eye bolt female M8 Cover panel To be mounted on the fan guard.

Wall electronic controls For each unit must be prouided -the ADC conuerter for wall controls-

The descriptions and illustrations provided in this publication are not binding: Sabiana reserves the right, whilst maintaining the essential characteristics of the types described and illustrated, to make, at any time, without the requirement to promptly update this piece of literature, any changes that it considers useful for the purpose of improvement or for any other manufacturing or commercial requirements. A leading brand of Sabiana s.p.a. • uia Piaue, 53 • 20011 Corbetta • Milano • Italy phone +39.02.97203.1 r.a./+39.02.97270H29 /+39.02.97270576 fan +39.02.9777282 / +39.02.9772820...