8060
1 / 5ページ

カタログの抜粋

resoltech * resoltech 8060 Hardener 8068 High Tg epoxy filler Mb. . wy.v»w is.'Av.*. - Tg up to 119°C - Fast curing - Easy sanding - Suitable for radio-electric applications

カタログの1ページ目を開く

RESOLTECH 8060 / 8068 filler is an epoxy formulated for profiling or repairing parts with high temperature resistance demand. After curing at ambient temperature, a post-curing at 60°C will be needed to release from the mold. To reach optimal mechanical and thermomechanical properties with TG up to 119°C, a post-curing of 4 hours at 120°C is required. RESOLTECH 8060 / 8068 is suitable for radio-electric applications as radome. The mixing ratio must be accurately followed. It is not possible to change the ratio, it would result in lower mechanical properties. The mixture should be thoroughly...

カタログの2ページ目を開く

8068 : White to yellowish paste yrn Visual aspect I 8060 : Blue paste * Gel time measurements realized with Rheotech® ** Gel time on film measurement realized on rheometer

カタログの3ページ目を開く

In order to obtain the maximum thermo-mechanical properties, it is necessary to respect the recommended curing cycle. The table below shows the glass transition temperatures (DSC) according to different curing cycles.

カタログの4ページ目を開く

HEALTH & SAFETY - Metal box kit of 0.5kg + 0.2kg - Metal bucket kit of 3kg + 1.2kg - Metal bucket kit of 18kg + 7.2kg TRANSPORT & STORAGE Keep containers sealed and away from heat and cold preferably between 10°C and 30°C in a well ventilated area. Our products are guaranteed in their original packaging (check expiry date on the label). Skin contact must be avoided by wearing protective nitrile gloves & overalls or other protective clothing. Eye protection should be worn to avoid risk of resin, hardener, solvent or dust entering the eyes. If this occurs flush the eye with water for 15...

カタログの5ページ目を開く

8060 1 / 5ページ

カタログの抜粋

Resoltechのすべてのカタログと技術パンフレット

8060
1 / 5ページ