8050 ECO
1 / 6ページ

resoltech * resoltech 8050 ECO Hardener 8058 ECO Biobased epoxy profiling & fairing filler - 25% biobased on the resin part* - Simple mixing ratio 1/1 by weight or volume - Easy sanding - Fast curing - Lightweight: 0,8 density *ratio of the number of biobased carbon atoms / the number of total carbon atoms Datasheet V2 - 31.03.2023 / Previous version - 20.04.2022

RESOLTECH 8050 ECO / 8058 ECO is a fast curing, lightweight, and easy sanding epoxy filler. It is a premium choice for profiling & fairing above and below the waterline for professional applicators on steel, aluminum and composite materials. The specially formulated lightweight epoxy filler will apply from very thin layers up to 25 mm in one coat without the risk of sagging/slumping. This filler will result in a high strength and impact resistant watertight surface. The formulation of the 8050 ECO / 8058 ECO will help improve health and safety for the workers and follows the latest EU...

As general rule: all substrates must be sanded, cleaned and dried - On previously painted surfaces : clean thoroughly to degrease the surface and sand with 80-180 grade paper or remove all previous coatings if in poor condition and prime the substrate. - Steel/Aluminum: Prime with RESOLCOAT 3010T / 3014T. - Wood: Prime stable constructions only, with RESOLCOAT 1010 ECO / 1014 ECO. - GRP: For osmosis treatment, prime the sanded fibre with 1020L / 102xL in order to waterproof the substrate and lightly sand/deglaze before application of filler. - BARE GRP/COMPOSITE: Remove surface wax/mould...

Mix : Light blue paste 8058 ECO : Light white paste rn Visual aspect I 8050 ECO : Blue paste Datasheet V2 - 31.03.2023 / Previous version - 20.04.2022

ym Glass transition temperature & Hardness Flexion properties on pure resin according to ISO 178 Datasheet V2 - 31.03.2023 / Previous version - 20.04.2022

HEALTH & SAFETY - Box kit of 0.5kg + 0.5kg - Box kit of 2.5kg + 2.5kg - Bucket kit of 15kg + 15kg - Drum kit of 150kg + 150kg TRANSPORT & STORAGE Keep containers sealed and away from heat and cold preferably between 10°C and 30°C in a well ventilated area. Our products are guaranteed in their original packaging (check expiry date on the label). Skin contact must be avoided by wearing protective nitrile gloves & overalls or other protective clothing. Eye protection should be worn to avoid risk of resin or hardener entering the eyes. If this occurs flush the eye with water for 15 minutes,...