2080M 17 & M25
1 / 5ページ

resoltech * resoltech 2080M 17 & M25 Hardeners 2083M-2085M Structural epoxy foaming systems New. hardener 2083M. CMR Free - Final density of 170 or 250 kg/m3 - Can be released from the mold without post curing - Tg up to 110°C - Excellent thermo-mechanical properties - hydrophobic and rot-proof Datasheet V7 - 20.10.2022 / Previous version - 10.08.2022

RESOLTECH 2080 M are liquid foaming epoxy casting systems formulated to produce low density, closed cell, strutural cores. Those systems have a (free) expansion coefficient from 4.5 to 6.6, enabling the production of 170 and 250 kg/m3 epoxy foams. The slow, controlled foaming reaction makes un-necessary the use of mixing machines like with PU foams. The low pressure of the foaming will enable direct casting in the final parts without conforming moulds and without alteration of the dimensions of the composite. This system is available in black or white (to be pigmented with any RAL pigment...

Visual aspect i 2080 M17 or 2080 M25 : Opalescent white gel Transparent to yellow or black liquid White or black pourable gel ^2^ Density

CURING AND POST-CURING In order to obtain the maximum thermo-mechanical properties, it is necessary to respect the recommended curing cycle. The table below shows the glass transition temperatures (DSC) according to different curing cycles. Datasheet V7 - 20.10.2022 / Previous version - 10.08.2022

HEALTH & SAFETY - Box kit of 1kg + hardener - Bucket kit of 5kg + hardener - Bucket kit of of 25kg + hardener - Drum kit of 200kg + hardener - IBC kit of 1t + hardener TRANSPORT & STORAGE Keep containers sealed and away from heat and cold preferably between 10°C and 30°C in a well ventilated area. Our products are guaranteed in their original packaging (check expiry date on the label). Skin contact must be avoided by wearing protective nitrile gloves & overalls or other protective clothing. Eye protection should be worn to avoid risk of resin, hardener, solvent or dust entering the eyes. If...