2060 ALU 25
1 / 5ページ

resoltech * resoltech 2060 ALU 25 Hardeners 2062 & 2066H Aluminium filled epoxy casting system ! New Hardener 2062 - Hardener 2062 improved reactivity - Casting & lamination resin system - Excellent air release properties - For demanding curing & thermoforming cycles - No post curing needed to remove parts from molds - High modulus & mechanical properties Datasheet V3 - 14.01.2022 / Previous version - 16.12.2019

RESOLTECH 2060 ALU 25 aluminum epoxy resin is formulated for the production of composites tooling using it as casting resin or as wet layup lamination system. It enables the production of tooling that will resist many years to the most demanding heating and cooling post-curing cycles of: heating RTM & pre-preg tooling, thermoforming of thermoplastics or polymer concrete/solid surface injection tools. The heat conductivity of 0.81 W/mK (2062 hardener) is more than twice better than a conventional epoxy resin , meaning that the dwell temperature at which a part must be post-cured will be...

Visual aspect ! 2060 ALU 25 : Viscous grey filled liquid Transparent to yellow liquid Filled grey liquid ^2^ Density Reactivity measurements realized on Trombotech®

The 2060 ALU 25 system will cure at room temperature enabling to release moulds from the plugs/models at room temperature after 24h of its application, yet further post-cure of 2h at 80°C+ 3h @ 100°C will enable the resin system to obtain 100% of it's mechanical characteristics: Tg max : DSC, inflection point Hardness : ISO 868 Datasheet V3 - 14.01.2022 / Previous version - 16.12.2019

HEALTH & SAFETY - Box kit of 1kg + 0.07kg(2062) or 0.13 Kg (2066H) - Bucket kit of 5kg + 0.35kg(2062) or 0.65 Kg(2066H) - Bucket kit of 25kg + 1.75kg(2062) or 3.25Kg(2066H) - Drum kit of 200kg + 14 Kg (2062) or 26 Kg (2066H) TRANSPORT & STORAGE Keep containers sealed and away from heat and cold preferably between 10°C and 30°C in a well ventilated area. Our products are guaranteed in their original packaging (check expiry date on the label). Skin contact must be avoided by wearing protective nitrile gloves & overalls or other protective clothing. Eye protection should be worn to avoid risk...