2040G ECO
1 / 5ページ

resoltech ® resoltech 2040G ECO Hardeners 2045G ECO & 2049G ECO Structural Adhesive Epoxy for Wood Bonding, Structural Fillet Joints & Composites - 60% biobased on resin part* - Easy 4/1 mixing ratio by weight - Ambient temperature curing - Adjustable pot life - Applicable in high humidity conditions *ratio of the number of biobased carbon atoms / the number of total carbon atoms Datasheet V3 - 20.10.2022 / "Previous version - 14.09.2022

RESOLTECH 2040G ECO is a structural adhesive paste specifically formulated for fillet joints on wood and composites. It is also commonly used as general purpose structural wood adhesive, specially on vertical or overhanging surfaces thanks to its cohesion and high adhesion properties. Its thixotropy ensures no sagging on vertical walls, while maintaining great ease of application and smoothing. The system can be ordered with two different biobased hardeners, standard, 2045G ECO, and fast, 2049G ECO. Both of them have the same mixing ratio and are fully compatible with each other, offering...

General conditions of application of RESOLTECH 2040G ECO The mixing ratio must be accurately followed. It is not possible to change the ratio, it would result in lower thermo-mechanical properties. Do not use 2040G ECO at a temperature lower than 10°C It is recommended to carry out a test before any industrial application Substrates must be dry and free of grease and dust The mixture should be thoroughly stirred to ensure full homogeneity. If mixing large quantities it is recommended to use a mechanical stirrer during 5 effective minutes. Fillet joints The system can be applied by round...

Flexural properties on pure resin according to ISO 178 Datasheet V3 - 20.10.2022 / “Previous version - 14.09.2022

HEALTH & SAFETY - Metal box kit of 1kg + 0.25kg - Metal bucket kit of 3.8kg + 0.95kg - Metal bucket kit of 16kg + 4kg TRANSPORT & STORAGE Keep containers sealed and away from heat and cold preferably between 10°C and 30°C in a well ventilated area. Our products are guaranteed in their original packaging (check expiry date on the label). Skin contact must be avoided by wearing protective nitrile gloves & overalls or other protective clothing. Eye protection should be worn to avoid risk of resin, hardener, solvent or dust entering the eyes. If this occurs flush the eye with water for 15...