1020 ECO
1 / 5ページ

Biobased multipurpose Epoxy Laminating System - 40% biobased on resin part* - Adjustable pot life from 13mn to 11h30mn - Good elongation characteristics - Little sensitivity to humidity during application - Available in thixotropic version (1020T ECO) *ratio of the number of biobased carbon atoms / the number of total carbon atoms Datasheet V2 - 23.03.2023 / Previous version - 29.10.2021

RESOLTECH 1020 ECO is a room temperature epoxy laminating biobased system for wood-epoxy, concrete reinforcement and metal constructions that are inherently moving structures. In boat building, it may be used for all woods types lamination, coating, scarfing and strip planking. Thanks to its low viscosity and a wide range of hardeners (13 min to 11h30min), it allows applications in both traditional wet layup, vacuum bagging or under press. A thixotropic version, the 1020T ECO is available for vertical or overhanging applications prone to dripping. The mixing ratio for all hardeners is...

Reactivity measurements realized with Rheotech® Indication on the choice of hardener according to ambient temperature conditions : • For the whole year, the use of 1026S hardener is recommended ; • For winter conditions, the use of 1028S is recommended ; • For summer conditions, the use of 1025S hardener is recommended. Datasheet V2 - 23.03.2023 / Previous version - 29.10.2021

In order to obtain the maximum thermo-mechanical properties, it is necessary to respect the recommended curing cycle. The table below shows the glass transition temperatures (DSC) according to different curing cycles. Flexion properties on pure resin according to ISO 178 Datasheet V2 - 23.03.2023 / Previous version - 29.10.2021

HEALTH & SAFETY - Plastic jerrycan kit of 1kg + 0.3kg - Plastic jerrycan kit of 5kg + 1.5kg - Plastic drum kit of 25kg + 7.5kg - Drum kit of 200kg + 2 x 30kg or 3 x 200kg + 180kg 1020T ECO version is packaged in drums, stir before each use. Available on metal bucket of 10kg + 3kg. TRANSPORT & STORAGE Keep containers sealed and away from heat and cold preferably between 10°C and 30°C in a well ventilated area. Our products are guaranteed in their original packaging (check expiry date on the label). Skin contact must be avoided by wearing protective nitrile gloves & overalls or other...