TS.87
1 / 18ページ

^J/isrmailu broken 7. RECESSED DRAINAGE TRACK 12. PANEL INTERLOCK & TRUE DIVIDER 13. CENTER MEETING STILE WIMDOWS & DOORS 3415 BEUJNGTON RD N.LAS VEGAS, NV 89030 PH0NE:(702) 643-5700

TECHNICAL DESCRIPTION The Panda S.83 Thermally Broken Multi-Sliding Door System is the perfect solution for an overall eco-friendly building envelope. The S. 83 provides superior thermal performance for a wide array of projects that require a large opening slider. With multiple features in design, including specially designed gaskets and iso-bar technology this system can achieve a U-value of 0.213. The door system was developed for external use in custom luxury homes, high rise condominiums, hotels, restaurants, and various other project types in both residential and commercial...

CONFIGURATIONS WITH POCKETS MOST COMMON CONFIGURATIONS (SYSTEM CAN POCKET LEFT OR RIGHT) CONFIGURATIONS WITHOUT POCKETS (SYSTEM CAN STACK LEFT AND/OR RIGHT)

TRUE DIVIDER BOHOM PANEL RAIL (5) l}" RECESSED DRAIN TRACK (6) 2j" RECESSED DRAIN TRACK VERTICAL SECTIONI

TRACK WIDTHS (APPROX) CLEAR LOW-E TEMPERD IG GLASS THICKNESS

MINIMUM TRENCH DEPTH = l\" - F.F. THICKNESS FOR MIN. DEPTH INSTALLATION SUB-FLOOR MUST BE SMOOTH & LEVEL RECOMMENDED TRENCH WIDTHS: CLEAR LOW-E TEMPERD IG GLASS THICKNESS

MINIMUM TRENCH DEPTH = l\" - F.F. THICKNESS FOR MIN. DEPTH INSTALLATION SUB-FLOOR MUST BE SMOOTH & LEVEL RECOMMENDED TRENCH WIDTHS: CLEAR LOW-E TEMPERDIG GLASS THICKNESS

SUB-FLOOR MUST BE SMOOTH & LEVEL TRENCH WIDTH (RECOMMENDED) STANDARD GLASS \\\ \\ CLEAR LOW-E TEMPERDIG GLASS THICKNESS

SUB-FLOOR MUST BE SMOOTH & LEVEL TRENCH WIDTH (RECOMMENDED) CLEAR LOW-E TEMPERDIG GLASS THICKNESS

SHIM SPACE APPROX. \n DEPENDING ON TYPE OF BOTTOM TRACK & TYPE OF SILL FINISH HEADER TRACK WIDTHS (APPROX) (TYPE OF BOTTOM TRACK SHOULD BE TAKEN INTO ACCOUNT WHEN PLANNING ROUGH HEADER CONSTRUCTION) STANDARD GLASS \\\ \\ CLEAR LOW-E TEMPERDIG GLASS THICKNESS SHIM SPACE EPDM GLAZING HEADER JAMB

SHIM SPACE SIDE FRAME WIDTHS (APPROX) (TYPE OF BOTTOM TRACK SHOULD BE TAKEN INTO ACCOUNT WHEN PLANNING SIDE JAMB CONSTRUCTION)

EPDM GLAZING TRUE DIVIDER CLEAR LOW-E TEMPERDIG GLASS THICKNESS INTERLOCK & TRUE DIVIDE

CLEAR LOW-E TEMPERDIG GLASS THICKNESS CENTER STILE

POCKET INTERLOCK STUCCO BLOCK OUTER WALL CONSTRUCTION RECOMMENDED POCKET WIDTH (IF ANY SMALLER THAN THE RECOMMENDED WIDTH, INNER WALL MAY NEED TO BE FRAMED AFTER INSTALLATION OF BOTTOM TRACK) FELT BRUSH POCKET BOARD INNER WALL CONSTRUCTION STANDARD GLASS \\\ \\ CLEAR LOW-E TEMPERDIG GLASS THICKNESS POCKET INTERLOC

CLEAR LOW-E TEMPERDIG GLASS THICKNESS