TG63-150
1 / 10ページ

GEOTECHNICAL EQUIPMENT STATIC and DYNAMIC PENETROMETRIC TESTS IN A SINGLE MACHINE Extremely high performance for in situ static and dynamic tests in an EASILY TRANSPORTABLE compact structure. Thanks to its semi-automatic anchoring system, IT CAN BE HANDLED BY A SINGLE OPERATOR and it's a great solution for all those drawbacks which often limit the diffusion of STATIC TESTS, CONSIDERED AS SOME OF THE MOST VALID ONES FOR UNDERSTANDING THE SOIL AND SUBSOIL. THE TEST TIMES ARE DRASTICALLY REDUCED Its tracks allow for MAXIMUM MOBILITY EVEN ON THE WORST TERRAINS. With its three stabilizers and...

TG63-150 A CONFIGURATION SUITED TO ANY SITUATION The TG63-150 can be configured on request for static (150 kN), or static/dynamic penetrometric tests (average dynamic efficiency 78%). The static tests can be carried out with a mechanical cone (CPTm), or digital probes like the piezocone (CPTu), and combined also with a seismic module (S-CPTu) to get a better understanding of the soil. The static/dynamic method allows information to be obtained along verticals consisting of soil with different mechanical characteristics (from very soft to very hard and compact), while it is possible to...

CPT TESTS Maximum thrust capacity (kN)- (pounds) 150 - 33721 Maximum extraction capacity (kN )- (pounds) 160 - 35969 Test speed (cm/s) - (foot/s) 2 - 0.065 selector for CPTm tests with load cell and electronic board for manual data acquisition. Maximum thrust readable from the load cell (kN) - (pounds) 150 - 33721 DP TESTS The following tests can be performed: Type 4-stroke, 2 cylinders V 60°, unleaded petrol, forced air-cooling and muffler Starter Power (Hp) - (kW) Displacement (cm3 )- (in3 ) Air filter Consumption (litres/hour) - (US gallons/hour) Cowling Electric and hand...

Penetrometer user's manual, engine user's manual, certificate booklet and DVD video training

PLATES There are engraved aluminium plates riveted to the frame to explain how the hydraulic levers work. The electrical controls, on the operator panel, can be identified via printed adhesive film SOFTWARE Software for CPTm test PETROL DIESEL Weight without accessories 1000 kg/2205 pound Soil pressure (without accessories)

SIZE AND WEIGHT CPT+DP CONFIGURATION Weight without accessories 1100 kg/2425 pound Soil pressure 0.28 kg/cm2 - 28.2 kPa PETROL DIESEL

TG63-150 AVAILABLE ACCESSORIES DS 44 SAMPLER ROTARY HEAD MANUAL SELECTOR (CPTm) SEISMIC MODULE S3X (S-CPTu)

GEOTECHNICAL EQUIPMENT www.pagani-geotechnical.com Pagani Geotechnical Equipment Srl Loc. Campogrande 26, 29010 Calendasco (Piacenza) Italy Tel: +39 0523 771535 - Fax: +39 0523 773449 info@pagani-geotechnical.com Non-binding data, with right to make changes. The diagrams may differ from the standard version. The equipment may differ depending on which country it is being shipped to.