TG63-150
1 / 4ページ

GEOTECHNICAL EQUIPMENT Static and/or dynamic tests in one equipment. B4QINI GEOTECHNICAL EQUIPMENT Pagani Geotechnical Equipment Localita Campogrande - 29010 Calendasco (Pc) - Tel +39 0523/771535 Fax +39 0523/773449 - Italia - e-mail: info@pagani-geotechnical.com

Static and/or dynamic tests in one equipment. The penetrometer TG63-150 can be configured by request for dynamic penetrometric tests, static penetrometric tests, or both. As for dynamic tests, depending on the soils mainly examined, the penetrometer can be equipped with different beating systems (Super heavy DPSH, Heavy – DPH or Medium – DPM). It allows also to take adjusted or limited trouble samples which enable a better interpretation of the measurements. The TG63 stand out for its very high power efficiency (78%). Verticality is guaranteed during penetration of the rods and of any...

CPT tests Max pull-down force (kN) - (kilopound) 150 - 15296 Max pull-up force (kN) - (kilopound) 160 - 16315 Test speed (cm/sec) - (foot/sec) 2 - 0.065 Selector for CPT tests with load cell and manual data acquisition electronic card Max pull-down force measured by the load cell (kN) - (kilo-pound) 150 - 15296 Electric system Battery N°1 - 12V - 35Ah - 300A - no maintenance required Battery disconnector Hand controlled Hydraulic system DP tests The following tests can be carried out: Starting Power (Hp) - (Kw) Displacement (cm3) - (inch3) Torque (kgm) - (inch-pound) -...

Penetrometer use and maintenance manual, engine use and maintenance manual, certificate folder, software use manual Some engraved aluminium plates identifying the functions of the hydraulic levers are riveted onto the frame. The electric controls on the operator panel are identified by engravings on the panel Pagani Geotechnical Equipment Localita Campogrande - 29010 Calendasco (Pc) - Tel +39 0523/771535 Fax +39 0523/773449 - Italia - e-mail: info@pagani-geotechnical.com Non-binding data, subject to modifications. Pictures may differ from the standard version. Equipment may be different...