Model 5010
1 / 8ページ

| Quick and simple mounting | Drainage holes | Only 3 fixing points required on 2500 mm | Suitable for roof installation | For glass thicknesses between 12 - 21,52 mm | Private and commercial areas WE'RE ONLEVEL | WWW.ONLEVEL.COM

The One and Only. The Profile TL-5010 is the one and only solution for applications on insulated flat roofs and for clamp mounted installation on hollow facades. The mounting post can be adjusted individually. The optimum stiffeners in the profile enable a length of 2.5 metres with only 3 fixing points. This is extremely efficient and cost-saving, especially when it comes to sealing roofs and facades. Essential Features | Only 3 fixing points required on 2500 mm | ONLEVEL Flex-Fit Glass Adjustment Tool | Extension pin holes | Drainage holes | Suitable for roof installation | Integrated...

Integrated multifunctional sophisticated chamber Ideally suited for use on insulated flat roofs

Glass profile | Height 147 mm | Width 65 mm | Sales unit: 1 piece Model 5010 Plain aluminium Inside corner 90° | Interior side length 135 mm | Exterior side length 200 mm | Sales unit: 1 piece Model 5010 Plain aluminium Art. no. 10.5010.300.11 Outside corner 90° | Interior side length 135 mm | Exterior side length 200 mm | Sales unit: 1 piece Model 5010 Plain aluminium Art. no. 10.5010.350.11 End cap, left | For use on the left | Sales unit: 1 piece Model 5010 Plain aluminium

TL-5010 | 0.74 KN TOP MOUNT End cap, right | For use on the right | Sales unit: 1 piece Plain aluminium Length 300 mm Width 170 mm Required number per 2500 mm: 3 pieces Sales unit: 2 pieces Zinc-plated steel (interior) Length 170 mm Height 15 mm Width 40 mm Required number per 2500 mm: 3 pieces Sales unit: 2 pieces Zinc-plated steel (interior) Art. no. 90.7004.170.81 Extension pin | Length 40 mm | Diameter Ø 6 mm | Sales unit: 8 pieces

Finish interior application: zinc-plated steel (interior) Finish exterior application: V4A (exterior) Required number per 2500 mm: 6 pieces M12 Sales unit: 10 pieces Model 3541 Zinc-plated steel (interior) Art. no. 91.3541.218.81 Flex-Fit 1.0 kN | Fine adjustment of glass panes | For glass thicknesses between 12 - 21.52 mm | Adjustment of up to 34 mm in relation to the vertical axis Length 2500 mm 5000 mm 25 mtr Glass thickness Wedge colour Art. no. Art. no. Art. no.

MOUNTING INSTRUCTION FLEXFIT