s96ss asym bench
1 / 5ページ

Above and left, s96ss asymmetric bench, Powder coated galvanized steel cantilever support beam with offset perforated 316 grade stainless steel seat surface. Length 1800/2400, depth 480mm, height 427mm. , = Bench with offset legs (asymmetric). Available as above surface flange, below surface flange fixed or root fixed. street furniture designers and manufacturers omos

s96ss AGFF Fixing Instructions (for areas already paved) 1 Determine the location for the bench. Remove the pavers and excavate two holes at centres 1725 or 2325mm (depending on size version) for to minimum dimensions of L600 x W600 x D400mm. The size of the foundations may vary depending on the ground conditions. Foundations must be to Engineer’s specification. 2 Fill the holes with 35N20 concrete up to 15mm below the level of the underside of the pavers ensuring a good smooth surface finish. 3 Allow sufficient time for the concrete to set then apply a layer of dry sand/cement mix over the...

s96ss BGFF Fixing Instructions (for areas already paved) 1 Determine the location for the bench. Remove the pavers and excavate two holes at centres 1725 or 2325mm (depending on size version) to minimum dimensions of L600 x W600 x D400mm. The size of the foundations may vary depending on the ground conditions. Foundations must be to Engineer’s specification. 2 Fill the holes with 35N20 concrete up to 135mm below the level of the underside of the pavers ensuring the pads are level relative to each other (if the paving is not level then aim to achieve an average of 135mm). The pads should be...

s96ss RF Fixing Instructions (for areas already paved) 1 Determine the location for the bench. Remove the pavers and excavate two holes at centres 1725mm or 2325mm (depending on size version) to minimum dimensions of L400 x W400 x D550mm. The size of the foundations may vary depending on the ground conditions. Foundations must be to Engineer’s specification.. 2 Place the bench into the holes and position at the correct height above ground level. Ensure the bench is level then prop securely. 3 Back fill holes with concrete (35N20) leaving sufficient depth for paving slabs and bedding. 4 Once...

s96ss Care and Maintenance Guidelines The s96ss bench is constructed from galavnized steel and 316 grade stainless steel The materials have been selected for their excellent outdoor durability as well as their aesthetic properties. Some care is required to maintain the product’s original appearance. The extent to which maintenance is required will depend on a number of factors including environmental conditions, construction activity and level of use. Maintaining the painted galvanized steel frame The s96 frame is finished in polyester powder, a plastic coating which is baked onto the...