Cladding Solutions
1 / 7ページ

NOVAWOOD CLADDING SOLUTIONS novathermowood cladding products are 100% natural solid materials having their own unique features, including no chemicals with proved quality for all weather conditions. These materials should be applied and maintained properly in order to achieve a long product lifespan. Application solutions offered by our company The Surface To Be Cladded With Wood; • Minimum 2cm thick rough plaster should have been applied on the brick • In applications performed with soft construction elements other than brick (such as ytong, briquette etc.), the fitting between the wall...

NOVAWOOD CLADDING SOLUTIONS • In case of concrete walls, the installation can be started by fixing the underconstruction to the wall. • In case the cladding is applied on metal subframe, the wood underconstructions to be installed on metal should be capable of being screwed onto the metal. In case a thick metal is used, screws should be selected carefully considering the metal fatigue that can be seen in screws during the screwing process. Underconstruction (Carcassing); • The underconstruction of thermowood cladding profile should be thermally modified as well. • In case a construction...

NOVAWOOD CLADDING SOLUTIONS The space between underconstructions should not exceed 60 cm. steam balancer • In case the material used for heat and/or sound insulation is rockwool, steam balancer (tywek or equivalent) should be applied on rockwool in order to prevent the transpiration caused by the condensation resulted from the indoor and outdoor temperatures . • The space between the insulation material and cladding profile should definitely be more than 2 cm. • The material used as steam balancer should completely cover the rockwool and without any space between the material and the...

NOVAWOOD CLADDING SOLUTIONS • The rockwool used for heat and/or sound insulation should be applied together with the undercon- struction system. • The material used for heat and/or sound insulation should not be inflammable to avoid fire risk. There- fore, use of fireproof rockwool is suggested instead of inflammable insulation material. The steam balanc- er applied on the insulation material should also be of fireproof material (tywek fire curb or equivalent). • Use of insulated anchorage material is suggested in order to prevent heat bridge. • Wood cladding profiles should be treated so...

NOVAWOOD CLADDING SOLUTIONS • Thermowood cladding profiles should be installed with groove part facing down. • Stainless nails shot with air gun can be used during the installa- tion of cladding profiles. The nails should be driven invisibly through the grooves of wood. • It would be useful to apply polyurethane glue on the merging points of cladding profiles and undercon- • The head parts of the wood should not be directly exposed to water. Preservatives should definitely be applied to the cut head parts of wood • Cladding profiles should be supported on the back with structures that would...

NOVAWOOD CLADDING SOLUTIONS • There should be at least 2 mm working space at the T&G and back merging points of cladding profiles. To do that, spaces can be formed on the front merging points of cladding profiles using a pre measured lath. • Merging points on the corners should definitely be supported with underconstructions on the back. Working spaces should be formed at the front and rear of the corners. • The finishing structures of the wood cladding profiles should be worked out so as to leave working spaces. All endpoints of the cladding profiles (wall, ground etc.) should have at...