カタログ >
NAUE >
Secugrid® HS

Secugrid® HS
1 / 4ページ

カタログの抜粋

High Strength Geogrid Building on sustainable ground.

Secugrid® HS geogrids are laid geogrids made of high tenacity polyester filaments with an extruded polyethylene protective coating and welded junctions. Secugrid® HS combines high tensile strengths and low creep tendency with extreme robustness and resistance. Secugrid® HS was developed specifically for geotechnical applications in earthworks where tensile strengths of more than 400 kN/m are required. TYPICAL APPLICATIONS FOR SECUGRID® HS Embankment on soft soil The high-strength Secugrid® HS basal reinforcement increases the stability of embankment structures on soft soils - during...

カタログの2ページ目を開く

ADVANTAGES OF SECUGRID® HS Secugrid® HS is the choice for all applications where high tensile strengths over a long service life is required. The selection of the polymers used in combination with the applied product technology guarantees a robust and durable reinforcement product. All geosynthetics that are exposed to permanent loads experience loss of tensile strength over time as a result of creep effects. The degree of tensile strength reduction depends on the stress level, time, temperature and molecular composition of the polymer used. Table 1 shows a comparison between the usual...

カタログの3ページ目を開く

Approvals for the Naue Group Secugrid® is a registered trademark of Naue GmbH & Co. KG in various countries. The information contained herein is, to the best of our knowledge, true and accurate. There is no implied or expressed warranty. © 2021 Naue GmbH & Co. KG, Espelkamp, Germany · All rights reserved · No. 00201 · Status 26.10.2021

カタログの4ページ目を開く

Secugrid® HS 1 / 4ページ

カタログの抜粋

NAUEのすべてのカタログと技術パンフレット

Secugrid® HS
1 / 4ページ